Failsoft Mode

Two-Way Radio Concepts and Electronics Fundamentals · Last updated · About 2 min read

What Failsoft Is

Failsoft is the fallback condition a trunked radio system enters when it loses the ability to trunk normally — most commonly triggered by a loss of the control channel that subscriber radios rely on to be assigned a voice channel. Rather than going silent entirely, the system degrades gracefully: every repeater/channel at the affected site switches to operating as an independent conventional repeater (see Conventional Radio Systems), so communication can continue in a reduced form instead of stopping outright.

How It Behaves in Practice

Because a trunked site typically has far fewer physical channels than it has talkgroups, multiple talkgroups must share the same conventional channel once failsoft engages — for example, talkgroups A, B, and C might all end up sharing frequency #1, meaning users on those different talkgroups can now hear each other's traffic even though they normally wouldn't. The system sends a beacon telling capable subscriber radios to switch to their predetermined failsoft frequency, and most radios alert the user (e.g. with a beep) that they've entered failsoft. Not every talkgroup is guaranteed a failsoft frequency assignment — any talkgroup without one simply goes silent for the duration of the outage.

Why It Matters for System Design

Failsoft is a deliberate design safety net: it trades away trunking's efficiency and talkgroup privacy for continued basic communication capability during a control-channel outage, which is considered an acceptable tradeoff for critical (especially public-safety) systems where losing all communication entirely is the worse outcome.

References

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.