MCN Server 8000: Monitoring Motorola GCM 8000 and MLC 8000 IP Comparators
MCN Server 8000 monitors and controls Motorola GCM 8000 and MLC 8000 IP comparators plus legacy comparators, with clients over IP.
MCN Server 8000 is CTI's remote comparator display software for Motorola Solutions IP comparators, the IP-network successor of the MCNRCD editions. It monitors and controls these comparators directly through an IP network:
- GCM 8000 digital comparators,
- MLC 8000 analog comparators, and
- the Mixed Mode Voting Solution, a GCM 8000 and an MLC 8000 working together.
Because it is an enhanced Advanced Server, it also keeps the ability to monitor legacy equipment through MCN modules: ASTRO-TAC 3000 digital comparators, Digitac comparators, Spectra-TAC analog comparators, SNV-12 voters, and I/O and alarm devices. IP comparators and legacy equipment can appear on the same screens. It displays receiver status (Vote, Receive, Disable, Fail) and lets users Force Vote and Disable receivers. For comparator background see comparators and voting-receivers-and-comparators; for the Motorola environment see motorola-ccgw-conventional-channel-gateway.
Programs and system layout
| Program | Role |
|---|---|
| Hardware Setup | Selects which network interfaces to use for legacy support and enters the software key |
| MCN Config Server | The configuration program an engineer uses to build the system files: network interfaces, hardware, channels, receivers and display windows |
| MCN Server 8000 | Runs on the server PC. It has a local display of device status, lets the operator control receivers and I/O devices, and passes status and control to client PCs over an IP LAN or WAN |
| MCN Client (ClientRCD) | Runs on remote PCs to display status and control the system. Client PCs need no MCN network interface. The client needs IP multicast support from the server. Backup MCN servers can be selected |
The server PC is a stand-alone PC and does not need Windows Server software; clients can be stand-alone PCs or MCC 7500 dispatch console PCs running the client program. A package includes the software, a serialized USB hardware key and a software key that matches it and sets the licensed capabilities (such as the number of IP comparators and clients). No PCs are included. License options add comparators and clients, and a multi-network-interface option adds HIB-IP support. Windows events are logged by the config, server and client programs.
Interfacing to the IP comparators
GCM 8000
- Handles up to 64 receivers (subsites) over IP, in 64 fixed slots. When a GCM 8000 is added in MCN Config, 64 receiver entries are created that map to those slots.
- Subsite numbers are assigned in Motorola's customer service software for each GTR 8000 base radio or GPW 8000 satellite receiver, not in the comparator. Receiver names must be entered in MCN Config by hand.
- Limits: at most 3 simultaneous real-time sessions (the MCN server and the Motorola service software), so in practice no more than two MCN servers per GCM 8000. The MCN server and the service software cannot run on the same PC at once. The comparator will not allow a receiver in Fail to be disabled, and resets a disable when a receiver fails. A force vote made in the service software latches.
- Displayed states include Offline (server cannot reach the comparator), blank (no activity), DISABLE in capitals (permanently disabled/unconfigured in the Motorola software) versus Disable (disabled through MCN), Fail (the comparator cannot talk to the base radio), Rx Voice, Rx Data, Forced Vote, Vote, Vote Data and, in last-vote tables, Last Vote.
MLC 8000 analog comparator
- Handles up to 64 receivers, but is made of two kinds of unit: the VGU (the comparator, which connects to the console) and the AGU (a subsite link converter that connects to the base radios). MCN needs the VGU IP address and voter ID and, for each base radio, the AGU port ID and name.
- Its configuration tool exports a cluster file (MMC_Config.csv) for up to 4 channels; there is no automatic import, so the data is copied into the receiver window by hand (sorting it first helps). More than 4 channels means separate cluster files.
- Limits: up to 15 simultaneous sessions; the server and the MLC configuration tool cannot run on the same PC at once.
- States include Offline, Config Err (the receiver is set up in MCN but not in the comparator's base-radio list, or its ID is wrong), Fail (for example base radio port disconnected, power lost, no status tone, port not calibrated, or the VGU cannot reach the AGU in which case all of that AGU's base radios fail), Rx, Forced Vote, Vote and Last Vote. A Tech display table adds receive signal quality (0 to 5 bars) and transmit indication for technicians.
- The status-tone timeout (default 60 seconds) sets how long after loss of status tone a fail is shown.
Mixed Mode
A Mixed Mode channel combines a GCM 8000 (receivers 1 to 32) and an MLC 8000. The order of receivers (subsites) entered in MCN Config is "very important": it must match the order in the GCM 8000, which follows the subsite numbers programmed in the base radios and satellite receivers.
HIB-IP modules for legacy MCN networks
The HIB-IP family connects an MCN network on one side to a PC over Ethernet on the other, so legacy modules can be reached over a LAN or WAN.
| Model | Notes |
|---|---|
| HIB-IP (legacy) | Legacy UDP port only; 10Base-T (older versions also had an unused AUI port); 78 kbps MCN network |
| HIB-IP 8000 | Supports the legacy UDP port and the HIB-IP 8000 UDP port, which can be used in Motorola ASTRO 25 Radio Network Infrastructure (RNI) systems from a certain version |
| HIB-IP 8002 | New hardware platform: 100Base-TX full duplex with auto MDIX, USB configuration port, password-protected configuration, MCN daisy-chain power support, no HTTP status page. Requires MCN software 7.20 or later; configured with MCN Config over USB |
Software capacity: the standard MCNRCD and MCN Server connect to one HIB-IP type unit; the Advanced Server to four (expandable to 64 with licenses); and the Server 8000 to one (expandable to 64). Do not connect a new HIB-IP to a live IP network until its factory addressing has been changed to values compatible with that network, and never connect the MCN network jacks to Ethernet (mcn-installation-addressing-cabling-and-power). Each HIB-IP has its own address, an authorized PC list and a UDP port selection (HIB-IP legacy, 8000 or 8002).
EXB-IP extenders use the same IP idea to join separate MCN networks across a LAN or WAN.
Related
- mcn-system-performance-toolkit: statistics and inactivity detection for large systems.
- brsc-base-radio-status-concentrator: a software network interface for GTR 8000 base radios.
Source documents
This article summarizes the following published CTI Products manuals. They are the authoritative reference.
See also: CTI product documentation
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.