Repeater Controllers

RF, Antennas and Radio Sites · Last updated · About 2 min read

Core Functions

  • Keying logic: repeat only valid input (carrier + correct tone/code); drop on input loss after the programmed hang time (Common Radio Programming Parameters).
  • Timeout timer: forcibly unkey on excessively long transmissions — the stuck-mic defense at the repeater level, backstopping the subscriber-side TOT.
  • Station identification: transmit the station callsign on the required schedule, typically as Morse CW ID (or voice ID).
  • Courtesy tone: the short beep after a user unkeys — audible confirmation the repeater heard the transmission, and the "you may speak now" pacing cue that also lets the timeout timer reset between talkers.
  • Audio path control: level setting, and mixing of repeat audio with IDs/tones (see Audio Levels and Radio Interfacing).

Troubleshooting Angles

  • Repeats but never IDs / IDs but won't repeat: controller programming or its COR/PTT interconnect — the classic wiring points being COR polarity and audio level between receiver, controller, and transmitter (see COR and PTT Interfacing).
  • No hang time / clipped tails: hang timer set to zero or COR dropping early (squelch mis-set at the receiver — see Squelch Types).
  • Random kerchunks/keying: input squelch marginal, or DTMF/control decode falsing; check what the controller thinks it heard via its logs where available.
  • On integrated digital repeaters, the same symptoms map to codeplug settings rather than a physical controller — the conceptual checklist survives the hardware generation.

References

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.