Kenwood NEXEDGE NX 5700 5800

Kenwood and NXDN · Last updated · About 4 min read

Overview

The NX-5700 (VHF) and NX-5800 (UHF) are mobile radios in Kenwood's NX-5000 series, the newer, top-tier generation of the NEXEDGE family (the series also includes a 700 MHz/800 MHz model, NX-5900). Following NEXEDGE's naming convention, the lower number (NX-5700) is the VHF model and the higher number (NX-5800) is the UHF model; "(B)" suffixed variants (NX-5700(B)/NX-5800(B)) appear in Kenwood's current product catalog.

Multi-Protocol Capability

Kenwood confirms the NX-5000 series supports three digital Common Air Interfaces — NXDN, DMR, and P25 (Phase 1 & 2) — plus FM analog, in a single radio. A radio can simultaneously carry two digital protocols plus analog, in combinations such as FM/DMR/NXDN, FM/NXDN/P25, or FM/DMR/P25. The desired CAI can be selected as needed, letting an operator commit fully to one digital standard, stay undecided while evaluating options, or keep both digital and analog running during a phased migration. This is a step up in protocol flexibility from the NX-3720/NX-3820 series, which supports NXDN and DMR (plus analog) but not P25.

Key Features

  • NXDN: Conventional and Type-C Trunking Gen2 (up to 1,000 sites / 24 networks) — see NXDN Digital Standard.
  • DMR: Tier II conventional with 2-slot TDMA (per ETSI DMR standard), and, per some product listings, Tier III trunking support.
  • P25: Phase 1 (conventional and trunked) and Phase 2 (trunked) compatibility.
  • FM Analog: Conventional and LTR trunking modes.
  • 2.55-inch, 65,536-color TFT display (154 x 422 pixels) with an integrated luminance sensor for automatic backlight brightness adjustment; multi-line text data display (up to 5 lines).
  • Detachable front control panel that can function as a remote controller; the Front Panel and RF Deck can be purchased separately, letting an installer build multiple physical configurations (e.g., remote-mount trunk installs) from the same base radio.
  • Maximum capacity of 4,000 channels per radio, 512 channels per zone, 128 zones.
  • Integrated GPS module and antenna (with optional KRA-40G module support) and built-in Bluetooth 3.0 (Headset Profile and Serial Port Profile) for hands-free operation.
  • Active noise-cancelling audio processing "based on leading-edge digital technology" for clear transmit/receive audio in noisy vehicle cabins.
  • 56-bit DES encryption standard, with an optional 256-bit AES encryption upgrade.
  • Man-down and motion-detection sensors (embedded).
  • microSD card slot supporting cards up to 32 GB.
  • 6 front programmable function (PF) keys and 4 up/down selectors.
  • Environmental durability: IP54/55 dust/water ingress protection and MIL-STD-810 environmental compliance.

Display and UI Details

The color TFT display is the most visible differentiator from the NX-3000 series' monochrome alphanumeric display: at 154 x 422 pixels and 65,536 colors, it can render up to 5 lines of text plus status/channel information, with an ambient-light sensor automatically adjusting backlight brightness for cab conditions ranging from bright daylight to night driving. Combined with the detachable/remote-controller front panel, this lets fleets standardize on one RF deck while choosing either a full-featured color-display control head at the dash or a remote-mounted head for concealed/trunk installations.

Current Market Position

Kenwood's NEXEDGE mobile product list (as of this writing) shows the NX-1700/NX-1800, NX-3720/NX-3820 (plus the NX-3920/3921), and NX-5700(B)/NX-5800(B)/NX-5900(B) as the current active mobile lines. Of these, the NX-5000 series (NX-5700 VHF, NX-5800 UHF, and NX-5900 700/800 MHz) sits at the top of the range — it is the only mobile line spanning all three major digital land-mobile standards (NXDN, DMR, and P25) plus FM analog in one radio, and it carries the most advanced display/UI and audio-processing feature set of any current Kenwood NEXEDGE mobile. This makes the NX-5700/NX-5800 Kenwood's flagship mobile radio line, positioned above the multi-protocol (NXDN/DMR) NX-3720/NX-3820 series and the NXDN-only NX-1700/NX-1800 entry-level mobiles.

Typical Use Cases

Agencies and enterprises that need one radio platform capable of operating across NXDN, DMR, and P25 systems — useful for regional interoperability, phased digital migrations where the end-state standard isn't yet fixed, or fleets that must talk to partner agencies on different digital standards without carrying multiple radios.

References

See also: CTI product documentation

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.