Networking for Radio Systems
IP addressing, VLANs, NAT, VPNs, QoS for push-to-talk, time sync and the tools used to troubleshoot radio-over-IP networks.
28 articles.
- ACL (Access Control List)An access control list (ACL) is a list of rules configured on a router, switch, or firewall that specifies which traffic is permitted or denied.
- Computers Showing Different Times: Fixing Time Synchronization with NTPWhy computers, gateways and network devices drift apart on the clock, what breaks when they do, and how to set up and check NTP time synchronization on Windows, Linux and radio systems.
- DHCP vs. Static IP Addressing: Which to Use and WhyThe difference between DHCP and static IP addressing, how each works, when to use which for radio gateways, dispatch PCs and servers, and the mistakes that cause duplicate-address outages.
- End Point Protection on Radio and Dispatch ComputersWhat endpoint protection (antivirus, EDR, host firewall) is, why radio and dispatch PCs need it, and how to keep it from breaking installs, audio or network connections.
- Firewall Types: Stateful vs. StatelessA stateless firewall filters each packet in isolation, purely based on the information in that packet's own header (source/destination IP, port.
- IANA (Internet Assigned Numbers Authority)IANA is the organization responsible for globally coordinating the internet's foundational numbering and naming systems.
- IP Networking in Two-Way Radio SystemsModern land mobile radio (LMR) systems increasingly depend on IP (Internet Protocol) networks for far more than just an optional add-on feature.
- Latency, Jitter, and Packet Loss in Voice NetworksThree network impairments determine whether live voice over IP — telephony VoIP (Voice over IP) or radio RoIP (Radio over IP) — sounds good, tolerable.
- NAT (Network Address Translation)Network Address Translation (NAT) is a router function that rewrites the source and/or destination IP addresses.
- Networking: ARP (Address Resolution Protocol)ARP answers one small but essential question on an IPv4 network: "Who has this IP address.
- Networking: DHCP (Dynamic Host Configuration Protocol)DHCP is a client-server protocol that automatically assigns IP addresses (and related configuration like subnet mask, default gateway.
- Networking: DNS (Domain Name System)DNS translates human-readable names (like a hostname or domain name) into the numeric IP addresses.
- Networking: ICMP and PingICMP (Internet Control Message Protocol) is IP's built-in signaling channel — not a data transport like TCP / UDP.
- Networking: IP Address Classes (A, B, C, D, and E)Before CIDR (Classless Inter-Domain Routing) replaced it in 1993, IPv4 addresses were divided into five fixed "classes," identified by the value of an.
- Networking: IPv4IPv4 (Internet Protocol version 4) is the addressing scheme most IP networks — including most radio system IP backhaul described in IP Networking in Two-Way.
- Networking: IPv6IPv4 's 32-bit address space tops out around 4.3 billion unique addresses, which is far too small for a world with billions of internet users plus tens of.
- Networking: MAC AddressesA MAC (Media Access Control) address is the hardware-level identifier burned into (or assigned to) every network interface — Ethernet port, Wi-Fi adapter.
- Networking: TCP (Transmission Control Protocol)TCP is a connection-oriented transport-layer protocol that guarantees reliable, ordered delivery of data between two devices.
- Networking: UDP (User Datagram Protocol)UDP is a connectionless transport-layer protocol, defined in RFC 768 : it sends data ("datagrams") to a destination with no handshake, no connection setup.
- Networking: Unicast, Broadcast, and MulticastUnicast is one sender to one specific receiver, addressed to that single device's own unique IP address — a direct.
- Networking: VLANA Virtual LAN (VLAN) is a way to logically segment a single piece of physical network switching infrastructure into multiple separate networks that behave as.
- Networking: VPNs (Virtual Private Networks)A VPN creates a secure, encrypted communication path over a public or otherwise untrusted network (most often the internet).
- NTP (Network Time Protocol)The Network Time Protocol (NTP) is a networking protocol used to synchronize the clocks of computers and network devices across an IP network to a common.
- Port Forwarding and Remote AccessMany sites have no static public IP — the ISP (Internet Service Provider) changes it occasionally.
- SNMPSNMP (Simple Network Management Protocol) is a standard, widely-deployed protocol for monitoring and managing devices on an IP network — routers, switches.
- Subnet Masks Explained: Dotted-Decimal and CIDR NotationWhat a subnet mask does and the two ways to write it, dotted-decimal (255.255.255.0) and CIDR slash notation (/24), with a conversion table, worked examples and common mask mistakes.
- Switches, Routers, and HubsThe layer distinction is the durable mental model: hubs are layer 1 (bits), switches layer 2 (frames/MACs), routers layer 3 (packets/IPs).
- Wireshark and Packet CapturePacket capture means recording the actual network traffic passing a point in the network, packet by packet, for inspection.
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.