RadioPro Talk Mobile App: Connecting iPhone and Android Phones to a Two-Way Radio System
How the RadioPro Talk app connects Android and iOS phones to MOTOTRBO and NEXEDGE radio systems: setup, calls, maps, settings and Bluetooth PTT.
RadioPro Talk is a mobile app that connects an Android or iOS (iPhone and iPad) device to a Motorola MOTOTRBO or Kenwood NEXEDGE two-way radio system through a RadioPro IP Gateway. It works over cellular or Wi-Fi, so users who are outside the radio system's coverage can still reach their team. For the general idea of push-to-talk over a phone network see push-to-talk-over-cellular-poc. It is one of three RadioPro clients (radiopro-product-family-and-client-comparison).
Capabilities
- Push-to-talk and listen; fast switching between talk groups; zone and channel selection.
- Group calls, private calls to radios, and phone-to-phone private calls. Private calls to any PC client (Solo or Dispatch) are possible, and those PC clients and other app users appear in the contact list.
- Text messaging, Call Alert and Radio Check, and replay of up to the last five transmissions.
- GPS mapping of radio subscribers and app users.
- Speaker and microphone level controls, automatic gain control, and noise reduction (Android only).
- Bluetooth PTT integration, such as an Aina PTT Bluetooth speaker-microphone.
- Background mode on Android, so the app keeps running while other apps are used.
The minimum versions given in the data sheet are iOS 9.0 and Android 4.4 (API level 19) with the Google Play Store; the later System Compatibility table in the gateway guide lists Android 8.0 (API level 26) for current releases. The mobile app needs the gateway's Solo/Talk license and, for the GPS locate and mobile-client features, version 8.0.21 or later gateway software with the GPS Locate option (radiopro-ip-gateway-overview).
Getting started
- Install the app from the Apple App Store or Google Play (search "radiopro talk") and answer the permission questions. The guide recommends: allow audio recording; allow location only "while using the app" (location can be declined on Android if no Bluetooth device is used; on iOS it is requested on the first PTT press); allow Bluetooth when using a Bluetooth PTT.
- The app comes pre-configured for CTI's demo radio system: the Connections screen lists four demo connections (radiopro-dispatch-demo-and-quick-start).
- On the Contacts screen choose a group or a subscriber, then touch and hold PUSH TO TALK. If the button turns orange and a go-ahead tone is heard, speak; a tone like the busy bonk on a two-way radio means the connection is busy.
- Touch the zone/talk group area to list the zones and channels and select a different talk group.
- Select a contact and touch the Options icon for Message, Radio Check, Call Alert, Locate on Map and Replay.
- The globe icon shows a map: radio users have rectangular borders and Talk app users have oval borders; a green background means powered on and within radio coverage and grey means possibly powered off or out of coverage. Touching a name shows when the last position update occurred.
- The messaging icon lists text conversations.
Adding your own connection
On the Connections screen open Configuration, then the Edit tab and add a connection with the IP address or DNS name, user name and password provided by the system administrator. The gateway must be reachable from the phone's network, typically through port forwarding (radiopro-ip-gateway-installation-and-configuration).
Connection and behavior notes
- Addressing. Talk supports DHCP, but a static IP on the gateway is recommended: with a DHCP-addressed gateway the IP address entered in the app must be updated whenever the gateway's address changes. Talk can also connect by domain name if the gateway has a static IP address, is port-forwarded from a static public IP address and has a registered domain name pointed at it.
- Staying connected. Once connected, Talk stays connected until the user disconnects. It keeps retrying through network changes, such as a hand-off from cellular to Wi-Fi in a moving vehicle, rather than timing out.
- Background operation differs by platform. On Android, Talk shows a persistent notification that helps keep the app running and receiving in the background; at first launch answer the "let app always run in background?" permission with Allow, and turn on "Maintain connection on app close". On iOS, the app makes a good attempt to stay active in the background, but iOS does not allow this reliably, so an iPhone or iPad is inherently less dependable than an Android device for uninterrupted background monitoring. This is a platform limitation. Setting names can differ slightly between app versions.
- One talker at a time. Only one person can transmit through the app on a channel at a time. If the channel is busy, the user hears a busy tone (the "busy bonk") and must wait.
- Phone calls while connected. Incoming phone calls are still received while Talk is running. On iOS, incoming radio transmissions are not heard during an active phone call. On Android the "Interrupt phone conversations" setting decides whether radio traffic is heard over the call or only announced by a notification (see the table below).
- Bluetooth. Talk plays audio through any paired Bluetooth speaker. For a dedicated Bluetooth PTT speaker-microphone, the Aina PTT Voice Responder is the supported device.
- Subscriber map. The map shows the GPS positions of all subscriber radios on the network, not only the phone's own location.
- Operating systems. Talk for iOS supports the iOS versions that Apple currently supports and Talk for Android supports the Android versions that Google currently supports, so there is no fixed minimum that stays the same over time. Talk is versioned separately from the Version 9 gateway family. Current Talk release notes are published with each release in the app stores.
- Licensing. Talk connections come from the same pool as Solo on the gateway, and a connection beyond the licensed number is disconnected after 5 minutes. The license packs and the GPS Locate option are listed in radiopro-part-numbers-and-ordering.
Settings
| Setting | Effect |
|---|---|
| Microphone automatic gain control | Amplifies low-volume and attenuates high-volume microphone audio before transmit; when on, the Microphone Gain control is disabled |
| Microphone gain | 0 dB leaves levels unchanged; above 0 amplifies, below 0 attenuates |
| Playback automatic gain control and Playback gain | The same, for audio played on the phone |
| Data compression | Compresses audio packets, with some loss of quality. Turning it off may cause trouble on low-bandwidth cellular networks |
| Noise reduction for voice (Android) | Tunes the microphone for VoIP, using echo cancellation where available |
| Maintain connection on app close (Android) | Keeps the radio connection in the background after the app is closed; press back to return to Connections to disconnect |
| Interrupt phone conversations (Android) | When on, radio traffic is heard over phone calls (the other party does not hear it). When off, a notification appears and the last 5 transmissions can be replayed |
| Use speaker phone (iOS) | Plays radio audio on the speaker phone |
The About tab shows the app version, the gateway version required, device and connection information, and a Contact Us button that generates diagnostic information.
Bluetooth PTT
Version 1.8 added support for the Aina Bluetooth PTT voice responder. Pair it in the phone's Bluetooth settings, open the Bluetooth screen from Connections, press the top PTT button on the device, choose it from the list, press the PTT button again when the device page opens, and then enable "Use this device". It is used whenever you connect to a gateway.
Running in the background
Release 1.5 improved long-term background operation, and added mobile clients on the contact list and map and private conversations between mobile clients. Guidance from the release notes:
- iOS: keeping the app in the background requires Location Access; if it was not allowed at install, set it to "Always" in the device's settings for the Talk app.
- Android: Android 6.0 and later "doze" mode puts an idle device into low power after about an hour. When prompted to "Ignore battery optimizations", answer Yes; otherwise set it in the battery settings (the method varies by phone vendor). Location access is not needed for background activity but is needed to show the device on the map. The app normally shows one or two notification icons: "RadioPro Talk running", and the connection status once logged in.
- Keep the device plugged in as much as possible.
A 2017 battery test on a Samsung Galaxy S5 concluded that running RadioPro Talk in the background increased battery drain by about 2% per hour; in the test the battery went from 100% to about 15% in 9 hours with the app running, against roughly 31% remaining after 9 hours without it.
Source documents
This article summarizes the following published CTI Products manuals. They are the authoritative reference.
See also: CTI product documentation
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.