Kenwood NXR Repeaters
Kenwood's NEXEDGE infrastructure line carries the NXR model prefix: repeaters and base stations that anchor NXDN digital systems (see NXDN Digital Standard and Kenwood NEXEDGE Overview). A repeater receives on one frequency and simultaneously retransmits on another from a high site, extending the range of portable and mobile radios far beyond what they can achieve talking directly to each other — see Repeaters and Antennas Basics for the general concept.
Repeater Families
- NXR-710 (VHF) and NXR-810 (UHF) — the first-generation NEXEDGE repeaters. These compact units support NXDN digital operation in both 12.5 kHz and very-narrow 6.25 kHz channels as well as analog FM (frequency modulation), and formed the building blocks of generation-1 NEXEDGE conventional and trunked systems.
- NXR-5700 (VHF) and NXR-5800 (UHF) — higher-tier repeater/base stations from the NX-5000 product era, designed for demanding continuous-duty service and multi-protocol digital operation alongside analog FM. They pair naturally with NX-5000-series subscribers such as the NX-5700/5800 mobiles.
- NXR-1700 (VHF) and NXR-1800 (UHF) — a later, cost-effective repeater generation aimed at entry- and mid-tier NXDN systems, succeeding the NXR-710/810 role in current price lists.
Operating Roles
An NXR repeater can serve several distinct roles depending on how it is programmed and licensed:
- Conventional NXDN repeater — the simplest role: it repeats digital NXDN traffic on a fixed channel pair, gated by RAN (Radio Access Number, NXDN's digital squelch code).
- Analog/digital mixed mode — on a conventional channel, the repeater can be configured to accept both analog FM and NXDN digital traffic, repeating each in kind. This is the standard migration tool: a fleet can move from analog to digital gradually, radio by radio, on the same repeater without a flag-day cutover.
- Trunked channel — as a channel resource in a NEXEDGE trunked system, either Type-D (distributed, no dedicated control channel) or Type-C (centralized, with a dedicated control channel). In a Type-C system one repeater at each site carries the control channel while the rest carry voice. See NEXEDGE Trunking: Type-C and Type-D.
Multi-Site IP Networking
NXR repeaters can be linked over an IP (Internet Protocol) network to build multi-site systems. In conventional deployments this allows networked conventional channels, where traffic received at one site is repeated at the others so a single channel covers a wide area. In Type-C trunked deployments, IP links tie sites into one wide-area trunked network with subscriber registration and roaming between sites. The IP connectivity itself is ordinary networking (Ethernet, leased circuits, licensed microwave links, etc.), which makes site backhaul planning — bandwidth, latency, and reliability — part of any multi-site NEXEDGE design.
Related Pages
- Kenwood NEXEDGE Overview
- NEXEDGE Trunking: Type-C and Type-D
- Repeaters and Antennas Basics
- NXDN Digital Standard
- Kenwood NEXEDGE NX-5700/5800
References
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.