MCN Monitoring and Control Network: Comparator Display System Overview
CTI's MCN is a modular network that displays and controls voting-receiver comparators from consoles and PCs: architecture, uses and examples.
The Monitoring and Control Network (MCN) from CTI Products is a modular system for displaying and controlling the status of comparators (voters) in a voting-receiver radio system. It extends the comparator's status indicators to a PC or console and lets an operator or technician force-vote or disable receivers remotely. For background on what a comparator does see comparators and voting-receivers-and-comparators.
The system manual and the planner describe it as a family of hardware modules together with PC software for display and logging (mcn-remote-comparator-display-software). Both documents are from the 1990s; later products (mcn-server-8000-and-ip-modules, mcn-system-performance-toolkit, brsc-base-radio-status-concentrator) extend the same idea to IP networks and newer comparators.
Architecture
An MCN system is built from two kinds of module connected by one cable:
- A Comparator I/O Module is the hardware interface to the comparator. Depending on the comparator, this is a set of hard-wired discrete I/O points or an RS-232 serial connection.
- A User Interface Module lets the user monitor and control the comparator. The user interface can be as simple as lights and pushbuttons on a console, or a program on a PC.
The modules are connected by a single network cable between their network ports, which simplifies installation. A single network segment can chain up to 20 Comparator I/O Modules, and larger systems can tie several segments together with extenders, routers or repeaters. Auxiliary modules add special functions, such as monitoring and controlling transmitter sites, extending the network over leased lines or IP, or switching relays. Monitoring and control can be local (in the same building as the comparator) or remote over phone lines or a network.
What is monitored and controlled
The Comparator I/O Module receives four status messages from the comparator for each receiver: VOTE, RECEIVE, DISABLE and FAIL, and passes them over the MCN network to the User Interface Module for display. In the other direction the user interface sends FORCE VOTE and DISABLE commands, which the Comparator I/O Module translates for the comparator. MCN modules do not latch these controls: any latching has to come from the user interface device (for example a console must use a latching switch for DISABLE so the disable stays active after the button is released). The PC display software does provide a latched disable (a right mouse click disables the receiver and a second click re-enables it).
Because console VOTE and DISABLE lines are bidirectional, a console LED can show a disable that never reached the comparator (for example if the network cable is disconnected, or the receiver is force-voted and the comparator ignores the disable). The hardware manuals say which lines are bidirectional.
Supported comparators
The planner says MCN works with Motorola DIGITAC, Spectra-TAC and TAC comparators and Ericsson/GE analog voters (through the CIB), and can provide status and control to a console for ASTRO-TAC systems (through the AIB, which is sold exclusively through Motorola). ASTRO-TAC comparators themselves have no indication of active or voted receivers, so MCN adds one. The CIB manual also lists JPS and Doug Hall voters.
Applications
The planner targets: systems that need comparator display for dispatchers; remote comparator display and control for technicians; critical systems that need failure logging; large wide-area or many-channel systems; ribbon systems; analog trunking systems with voting receivers; ASTRO-TAC systems needing display on a PC or console; and any voting system that needs rapid maintenance and diagnostics. Typical customers named include public safety dispatch centers, police and fire departments, state police, state and local governments, turnpike systems, transit authorities, utilities, federal government systems and forestry and conservation agencies.
Benefits listed: easy RF communications troubleshooting; remote disabling of noise-producing equipment; automatic logging of RF system malfunctions; quicker maintenance and lower system down time; and, for PC systems, space savings compared with a button and LED panel.
System examples from the manuals
- 8 receivers with a console display: an AIB on an ASTRO-TAC comparator and one IIB on the console electronics. One IIB handles up to 8 receivers; add a second IIB configured for receivers 9 to 13 to control all 13.
- PC-based monitoring and control: a CIB on the comparator and an HIB to a PC running the Remote Comparator Display software. In a larger system three CIBs and an HIB let one PC watch three comparators.
- 16 receivers with a console display: one CIB may serve two comparators of the same type (up to 8 receivers total), and a different type of comparator uses its own CIB. All parallel I/O lines no longer have to be run the full distance between console and comparators; only a single network cable does (400 feet in the example).
- 24 receivers with multiple operator stations: several IIBs for the main console and HIBs for PCs, local and remote through modems. All stations show a force vote or disable made at any of them. One limitation: if a receiver is disabled with the console's latched switch and later re-enabled from a PC, the PCs show it enabled while the console LED still shows it disabled.
- Steered transmitter system: a TIB links the CIB and a Transmitter Steering Audio Matrix so a force vote on a receiver also steers to its transmitter, and the PC shows the active transmitter.
- Networks in multiple buildings: a pair of EXB modules over a leased line extends the network to a console more than 4000 feet away, and an optional handset on each EXB allows voice between the two sites.
- Multi-site networks with zone and master/slave (sub) comparators: in state- or city-wide systems each zone has its own comparator (slave or sub-comparator) whose voted audio goes to a master comparator at the dispatch location; EXB modules connect the MCN networks so both are monitored and controlled together.
Related articles
- mcn-installation-addressing-cabling-and-power: addressing, cabling, mounting and power.
- mcn-troubleshooting-and-module-indicators: LEDs and diagnostic steps.
Source documents
This article summarizes the following published CTI Products manuals. They are the authoritative reference.
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.