MOTOTRBO Linked Capacity Plus

Motorola and P25 Systems · Last updated · About 4 min read

Overview

MOTOTRBO Linked Capacity Plus is the multi-site variant of MOTOTRBO Capacity Plus. Where standard (single-site) Capacity Plus pools channels dynamically among the repeaters at one location, Linked Capacity Plus extends that same dynamic-pooling trunking behavior across multiple sites by linking the sites together over an IP network.

Motorola describes Linked Capacity Plus as acting much like IP Site Connect — which links conventional repeaters across sites over IP — except that Linked Capacity Plus links trunked Capacity Plus sites rather than conventional ones. In effect, it takes the "link multiple sites over IP" concept from IP Site Connect and applies it to a trunked, dynamically-pooled channel architecture instead of a fixed-channel conventional one.

How the IP Linking Works

Mechanically, Linked Capacity Plus links sites the same way IP Site Connect does: each site's repeaters connect over an IP network (Ethernet/UDP) back to the rest of the network, with call and control traffic forwarded between sites so that all linked sites participate in the same logical system in real time. As with IP Site Connect, this is not simulcast — each site keeps its own frequency pair, and a radio roams between sites rather than staying on one shared frequency (see Simulcast for the true same-frequency/GPS-locked technique, and IP Site Connect for why the two get conflated). The key difference from IP Site Connect is what is being linked. IP Site Connect links conventional repeaters that each relay one fixed channel, on their own local frequency, across every site. Linked Capacity Plus instead links trunked Capacity Plus channel pools — so instead of one fixed channel being replicated everywhere, the dynamic channel-pooling and talkgroup-assignment behavior of Capacity Plus (see Trunked Radio Systems for how control channels and channel grants work generally) is extended so that a talkgroup call can be automatically distributed to, and picked up from, any linked site the talkgroup is active at. This still depends on the same IP network quality considerations that apply to any multi-site MOTOTRBO link — adequate bandwidth, low latency, low jitter, and low packet loss between sites — since the sites are coordinating trunked channel assignments over that same IP path. See IP Networking in Two-Way Radio Systems for more on these shared network requirements.

Typical Deployment Scenarios

Linked Capacity Plus is typically chosen by organizations that started with, or would otherwise qualify for, a single-site Capacity Plus deployment but have operations spread across multiple nearby or regionally distributed locations that need to share talkgroups as one system — for example, a manufacturing company with a main plant and several satellite warehouses, a school district or university system with multiple campuses, or a utility with several regional depots. It's a natural next step up from single-site Capacity Plus when coverage, not just capacity, becomes the limiting factor, and a natural step below Capacity Max for deployments that don't yet need Capacity Max's larger scale, queuing behavior, or dedicated system-server architecture.

Why Use Linked Capacity Plus

Linked Capacity Plus is intended for organizations that have outgrown a single-site Capacity Plus deployment and need wide-area coverage — for example, a business with radio users spread across multiple buildings, campuses, or cities that all need to share talkgroups and dynamic channel capacity as if they were on one system.

Scale

Because Linked Capacity Plus is a deployment mode of Capacity Plus, it shares the same overall system limits:

  • Up to 120 repeaters across 15 sites
  • Up to 1,600 radios per site
  • Up to 24,000 radios total

For organizations whose scale requirements exceed these figures — more sites, more repeaters, or a need for call queuing rather than call blocking under peak load — Motorola's next tier up is Capacity Max, which supports up to 750 sites and 3,000 users per site on its distributed IP-networked architecture.

Supported Radio Series

Linked Capacity Plus is supported by the same MOTOTRBO radio series as Capacity Plus:

  • XPR 3000 series
  • XPR 7000 series
  • SL 3500e
  • SL 7000 series
  • XPR 5000 series mobiles

References

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.