MOTOTRBO Repeaters (SLR Series)
The Repeater's Role in a MOTOTRBO System
In a Motorola MOTOTRBO system — Motorola's DMR (Digital Mobile Radio) product line, see Motorola MOTOTRBO Overview — the repeater is the central piece of fixed infrastructure. It receives subscriber transmissions on its input frequency and retransmits them on its output frequency to extend coverage (the general concept is covered in Repeaters and Antennas Basics), but a MOTOTRBO repeater does considerably more than an analog repeater:
- Because DMR is a two-slot TDMA (Time Division Multiple Access) protocol, one MOTOTRBO repeater on a single 12.5 kHz frequency pair carries two simultaneous voice/data paths (timeslots).
- The repeater is the network node that links sites together over IP in IP Site Connect, and participates in trunking in Capacity Plus and Capacity Max systems.
- It enforces system-access features such as color codes and Restricted Access to System (RAS) authentication (see MOTOTRBO Restricted Access to System (RAS)).
The Current SLR Series
- SLR 1000 — a compact, low-power unit intended as a small-site or in-building coverage extender. It is designed for wall or pole mounting in places a full rack repeater would not fit, with an environmentally sealed enclosure suited to less controlled locations.
- SLR 5700 — the mid-power, general-purpose rack-mount repeater for the majority of single-site and multi-site systems. (An SLR 5500 variant serves other regional markets.)
- SLR 8000 — the high-power, high-tier repeater in the 100-watt class, aimed at demanding wide-area sites; it offers integrated options that smaller models lack (for example, an internal preselector option and analog wireline interface options for legacy console connectivity). That wireline option includes inherent Tone Remote Control support — TRC compatibility persists into this current-production repeater, not just retired Quantar/MSF-5000-era hardware.
System Roles
The same repeater hardware serves in every MOTOTRBO system architecture — the difference is configuration and licensing:
- Conventional single site — one repeater, two timeslots, standalone.
- IP Site Connect — repeaters at multiple sites are linked over IP into one wide-area conventional channel.
- Capacity Plus (single-site and multi-site/Linked Capacity Plus) — repeaters at a site pool their timeslots into a trunked channel pool.
- Capacity Max — repeaters act as trunked sites under a central system server, Motorola's DMR Tier III-based architecture for large systems.
Feature licenses purchased and installed on the repeater determine which of these modes it may run.
Analog, Digital, and Mixed Mode
MOTOTRBO repeaters can run as pure analog repeaters, pure digital (DMR) repeaters, or in Dynamic Mixed Mode, where the repeater automatically repeats whichever kind of traffic it receives — analog calls from legacy radios and digital calls from DMR radios — on a call-by-call basis. Dynamic Mixed Mode is a migration tool: it lets a fleet transition from analog to digital gradually on one repeater, with the important caveats that the channel behaves conventionally (mixed mode is not available in the trunked or IP-linked architectures) and that an analog and a digital call cannot occur at the same time, since analog operation occupies the whole channel rather than one timeslot.
Related Pages
- Motorola MOTOTRBO Overview
- Repeaters and Antennas Basics
- IP Site Connect
- MOTOTRBO Capacity Plus
- MOTOTRBO Capacity Max
- MOTOTRBO Restricted Access to System (RAS)
- DMR (Digital Mobile Radio)
- TDMA vs. FDMA
References
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.