Base Radio Status Concentrator (BRSC): Transmitter Status from GTR 8000 Base Radios

MCN and BRSC Monitoring · Last updated · About 7 min read

The Base Radio Status Concentrator is CTI software that gathers status from up to 240 Motorola GTR 8000 base radios and serves it to MCN Server 8000.

The Base Radio Status Concentrator (BRSC) is part of CTI's MCN software that emulates a hardware network interface. It performs the functions of a network interface virtually and supports connections to up to 240 Motorola GTR 8000 base radios. It interfaces only to GTR 8000 base radios and is not a client to any other application; instead it serves their status to the MCN Server 8000 software, which acts as a client of the BRSC. The BRSC is not a physical device: it is software that interfaces to GTR 8000 base radios, which are physical devices. Support began with MCN software version 10.02, so earlier systems must be upgraded.

For background on the MCN family see mcn-monitoring-and-control-network-overview and mcn-remote-comparator-display-software.

What it needs

  • A separate PC running Windows, where the BRSC runs as a service. It must not share a PC with the MCN Server application.
  • It is a hardware-based licensing option: a USB dongle and a license key file authorize it. Installation includes the MCN license server and the USB dongle drivers.
  • IP information for each GTR 8000 (alias name, IP address, subnet mask and gateway).
  • Configuration on both sides: the MCN Config Server program, where the MCN Server is configured as a client of the BRSC with a GTR network interface (version 10 or later), and the BRSC hardware setup application, where the BRSC server and an exclusive client are configured.

How it works

  1. All MCN configuration is entered in MCN Config. The MCN Server then uploads the system data to the BRSC service so the BRSC can build its own system files and local cache. The BRSC will not operate without this information, and the service may need to be reloaded or restarted afterwards.
  2. The MCN Server that made the most recent upload becomes the BRSC's controlling server. To hand control to a different MCN Server, that server prepares its data and uploads it, and it becomes the new controlling server.
  3. The BRSC gathers transmitter status from the GTR 8000 base radios, shows it locally, and forwards it to its authorized clients. The MCN Server 8000 displays the base radio status on its display windows. Authorized PCs (by IP address) are listed during installation, and each BRSC network interface has its own name and unique IP address and UDP port.

Key attributes: it acts as a bridge within the Motorola network, connects exclusively to GTR 8000 base radios, shows transmitter status locally, forwards status to client applications and runs standalone.

Operating modes

  • Service mode (with the BRSC Viewer): starts automatically and runs in the background with no user interface, for continuous unattended operation. The Viewer shows the operational status of the service.
  • Application mode (BRSC Desktop): started manually for verifying and troubleshooting. File, Reload System reloads the system and shows GTR connection status.

The two modes perform the same function and cannot run at the same time.

Settings

The Options, Network Settings window holds the IP address of the PC's network card, a control port for commands between server and client, and an optional multicast setting (a multicast IP address and port within the ranges reserved for multicast; not every network supports multicast, so IT help may be needed). The View menu offers a status bar, a topmost-window option, GTR status, client status (which authorized clients are connected), a tab selector and layout mode. Shift-clicking a display element shows its properties: name, description, device and GTR address, channel, subsite index, raw display value and UDP port.

The reference manual also includes a troubleshooting guide for connection problems with the base radios.

Status data the BRSC collects

For each GTR 8000 base radio the BRSC collects three kinds of transmitter status:

Category Possible values
Connection status Online or Offline
Transmitter state Enabled, Inhibited or Failed
Activity state Idle, Voice, Data or Test

The BRSC monitors base station radios, not mobiles or portables. It is especially useful for simulcast systems, where many base radios at several sites need central status visibility. In the MCN Server 8000 display this status appears as "GTR status".

Where the status goes

The BRSC is only ever a server; it is never a client of another application. Two applications can connect to it as clients, and both receive the same base radio status feed:

  • MCN Server 8000, which shows the status next to the comparator displays (mcn-server-8000-and-ip-modules).
  • CTI's RF Monitoring (RFM) application, which combines the BRSC transmitter status with COR data to analyze a simulcast radio channel. The BRSC can also send its data directly to an RFM PC or an ATIA repeater: Options, RFM enables this client and sets the destination IP address and port, and the installer has a step for the same destination.

A client is accepted only if its IP address is on the BRSC's authorized PC list. The MCN Server also has a license option for the connection to a BRSC PC. This family of products works with Motorola P25 equipment; it does not communicate with MOTOTRBO equipment. The reference manual states plainly that the BRSC cannot be used with base radios other than the GTR 8000.

Requirements and versions

  • Versions. The BRSC Network Interface can be added or configured only in MCN Config Server version 10.xx, even on a system where the BRSC itself is installed. Support for the full 240 base radios needs MCN BRSC version 10.02.23 or later.
  • A PC of its own. The BRSC runs on a dedicated PC and must never share a PC with the MCN Server application; the manual calls this imperative. The BRSC installer also installs the MCN license server and the USB dongle drivers, so installing it on a PC that already runs another MCN product can produce conflict messages during setup.
  • PC and operating system. The data sheet lists a native 64-bit Windows application for Windows 7, 10 or 11 (Pro), a dual-core Xeon at 2 GHz, 2 GB of memory, a CD-ROM drive, an open USB 2.0 port, a 100Base-T port and a color monitor. The reference manual describes the BRSC as running as a Windows service or as a desktop application.
  • Setup program. The BRSC hardware setup application imports the license key, selects the network card on a PC with several, maintains the authorized PC list and sets the destination for the data.
  • Addresses and ports. Each GTR 8000 is assigned its own UDP port from a dynamic port range on the BRSC PC, so a firewall must allow a range rather than a single port. Besides the control port, multicast can be enabled toward MCN Server, not only toward RFM.

Licensing and part numbers

The BRSC license scales with the number of GTR 8000 transmitters, in blocks of ten, not as a flat fee per BRSC. A BRSC needs both a USB dongle and a license key file. To reach the 240-radio maximum, enough ten-transmitter add-on blocks must be ordered. The data sheet lists:

Motorola part number CTI part number Description
DSS261953 NA MCN Server option for the connection to one BRSC PC, including support for the first 10 GTR transmitters
DSS161950 NA BRSC software license supporting up to 10 GTR 8000 transmitters
DSS261951 NA BRSC license option for an additional 10 GTR 8000 transmitters
DSS261952 S2-61952 BRSC software manual

The first three items can be ordered only through Motorola Solutions. The reference manual's own front matter lists S2-61950 as "MCN BRSC".

Security recommendations

Appendix A of the reference manual gives 13 general recommendations: install on a separate PC in the default program directory; keep configuration files out of the program directory and in a location that needs Administrator rights; run the configuration software with the lowest permissions possible (MCN Config Server itself must run as Administrator); keep sensitive information out of configuration files; follow normal backup, patching, anti-virus and Windows hardening practice; use strong passwords; and limit physical and network access to PCs, routers and switches.

Source documents

This article summarizes the following published CTI Products manuals. They are the authoritative reference.

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.