MCN System Performance Toolkit: Detecting Inactive Receivers and Collecting Radio System Statistics
The MCN System Performance Toolkit finds receivers and I/O points that never receive, vote or change state, and logs hourly system statistics.
A comparator reports only a limited set of indications, so a voting system can have problems the comparator itself never flags. The MCN System Performance Toolkit (SPT) is a set of programs used with the MCN Server, Advanced Server or MCN Server 8000 to catch them and to gather statistics. The earlier System Watchdog program was an adjunct to the MCNRCD software with the same purpose: detect inactive receivers by watching channel activity from one or more server PCs, log them to screen, printer and disk, and create a server activity file summarizing channel activity for the optional Data Miner.
Problems the comparator cannot see
The manual lists conditions the comparator's own failure indication may miss:
- signal-quality modules (Motorola) or receiver modules (Ericsson/GE/M-A/COM) removed from the comparator card cage;
- CIB modules disconnected from the comparator card cage;
- receivers that never receive, which can be a receiver or antenna system problem;
- receivers that never vote, which can be very noisy telephone lines, a bad receiver or a bad input module on the comparator.
The toolkit assumes that in any working system every receiver should show some Receive or Vote activity every so often. It can also monitor other watchdog statuses defined in the MCN database, flagging status points that are stuck in one condition too long: a generator that does not start for its weekly test, a generator that runs for an extended period, or a standby T1 path or other standby device that stays selected too long. See voting-receivers-and-comparators.
It cannot say why a receiver is inactive; it alerts the technician, who has to find the root cause.
What the toolkit helps you do
Monitor overall system performance; identify receivers that may have coverage problems; gather statistics; and watch for long-term performance changes in the radio system.
Components
| Program | Role |
|---|---|
| System Watchdog Setup (WdSetup) | Configures the PC's network interface and the address of the MCN Server |
| System Watchdog Service | A Windows service that acts as a client of the MCN Server, gathers activity data, detects inactive receivers, sends alerts to Data Miner and creates hourly activity summary files for the receivers and I/O points that have watchdog statuses |
| Data Miner | The user interface: it gives alerts when radio system resources have been inactive too long and lets you view and export historical activity (for example to Microsoft Excel) |
If the watchdog service cannot reach the MCN Server, or the server has no system loaded that is configured for the toolkit, the PC beeps the letters "SWD" in Morse code every 8 to 10 seconds until the problem is fixed or the service is stopped.
Levels, licensing and compatibility
| Level | Maximum receivers or I/O points monitored |
|---|---|
| 1 | 128 |
| 2 | 512 |
| 3 | Unlimited (limited by the MCN Server's capability) |
The level must cover all receivers and I/O points in the configuration's receiver window, whether or not they have watchdog statuses. The option is licensed through the software key of the MCN Server (the server's hardware key ID is needed when ordering later). Levels 1 and 2 may share the server PC, but level 3 should run on a separate PC to reduce server load. The toolkit does not work with the non-server MCN Standard software. Versions 7.26 (32-bit), 8.20 and 10.09 match the same MCN Server versions; the 32-bit version is limited to roughly 3000 receivers with up to 6 watchdog states each on up to 80 radio channels, so the 64-bit version is recommended for large systems.
Requirements and setup
- A separate PC with at least 200 GB free disk space, a USB port, sound card and speakers, Ethernet and Microsoft Excel (2010 or newer) to read exported data; the 64-bit version needs at least 8 GB memory and a modern multi-core processor.
- An IP connection to the MCN Server that supports IP multicast from the server to the toolkit PC.
- The MCN database must be configured with watchdog statuses using MCN Config Server, and if the server restricts client permissions the toolkit PC must be given access.
- The watchdog service and the MCN Client program are both clients of the server, and only one client application can run on a PC at a time, so the Client should not be run on the toolkit PC at the same time.
- Let the service gather data for an hour or two, then open Data Miner to see results.
Source documents
This article summarizes the following published CTI Products manuals. They are the authoritative reference.
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.