Emergency / Man-Down Alerts

Two-Way Radio Concepts and Electronics Fundamentals · Last updated · About 2 min read

What It Is

Man-down and lone-worker alert features use sensors built into a portable radio to automatically detect a possible medical emergency or fall, and transmit an alert without requiring the user to press anything — critical precisely because an incapacitated worker can't press an emergency button.

How Detection Works

Two sensor types are commonly combined:

  • Tilt sensors — detect a sudden change in the radio's orientation relative to vertical, the signature of a user falling (going from upright to horizontal), triggering an alert even if the user is technically still moving (e.g. rolling on the ground after a fall) in a way a pure motion sensor might miss.

What Happens on Alert

Once triggered, the alert can notify an individual, a talkgroup, or a central dispatch/control room — delivered as an audible tone, a text/status message, or a pre-recorded voice announcement, and depending on system integration, can also reach PABX phone systems or email/SMS recipients outside the radio system itself (see Radio System and Phone System Integration for that kind of cross-system alerting path). The key operational benefit over a manual panic button: there's no dependency on the worker being conscious/able to act, and no delay waiting for someone to notice they're missing.

References

See also: CTI product documentation

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.