Two-Way Radio Dispatch and Computer-Aided Dispatch (CAD)
Two Different Things That Share a Desk
"Dispatch" gets used loosely for two distinct systems that usually sit side by side at the same console position:
- Radio dispatch — the communications function: monitoring and transmitting on radio channels/talkgroups, done through a dispatch console.
- CAD (Computer-Aided Dispatch) — the incident-management function: tracking calls for service, units, statuses, and locations, done through CAD software.
Radio Dispatch
Modern IP-based dispatch consoles are built with extensible architectures specifically so they can integrate bidirectionally with other software rather than operating as a standalone silo.
Computer-Aided Dispatch (CAD)
CAD software manages the incident lifecycle: a call for service comes in (by phone, NG911, officer-initiated, or alarm), CAD creates an incident record, recommends/assigns units based on availability-location-capability, tracks unit statuses (dispatched → en route → on scene → clear) with timestamps, and feeds the record onward to reporting/records-management systems (RMS). It is the authoritative log of what happened operationally, most heavily used in public-safety (police/fire/EMS) environments — Motorola's PremierOne CAD is one widely-deployed example — but the same pattern runs in utilities, transit, campus security, and large private fleets at lower intensity.
CAD is not a radio product: a CAD system neither keys transmitters nor decodes talkgroups. It rides alongside the radio system and, when integrated, exchanges data with it.
The Distinction, Concretely
| Radio dispatch console | CAD | |
|---|---|---|
| Manages | Communications — channels, talkgroups, patches, PTT | Incidents — calls, units, statuses, locations |
| The "unit" is | a radio ID / talkgroup | a resource with capabilities, status, and history |
| Primary record | audio (logging recorder / Archive Viewer) | the incident record (timestamps, dispositions) |
| Fails how | can't hear/talk to units | can't track/assign — dispatchers fall back to paper + radio |
A radio system can run without CAD (many commercial fleets do — voice coordination only), and CAD can technically run without radio integration (dispatcher relays everything by voice). The value of pairing them is the data flow between the two.
Where the Two Meet (Integration Points)
When CAD and the radio side are integrated, typical touchpoints are:
- Status/messaging: field units update status with radio text messages or button pushes instead of voice ("10-8/10-23" without airtime); CAD sends run details to units as text.
- Identity and emergency: radio ANI/emergency alarms pop the corresponding unit/incident in CAD.
- When CAD is integrated with the radio dispatch console itself, a dispatcher can send text alerts, view unit locations, and manage talkgroups directly from the CAD application without switching tools — Motorola's PremierOne-to-Motorola-console integration is the canonical example.
Related Pages
- Dispatch Console Operations Concepts
- Dispatch Mapping and Slippy Maps
- Emergency / Man-Down Alerts
- Radio System and Phone System Integration
References
See also: CTI product documentation
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.