End Point Protection on Radio and Dispatch Computers

Networking · Last updated · About 5 min read

What endpoint protection (antivirus, EDR, host firewall) is, why radio and dispatch PCs need it, and how to keep it from breaking installs, audio or network connections.

End point protection (also written endpoint protection) is the security software that runs on an individual computer, server or device, the "end point" of the network, to stop malicious software and attacks. On a radio network the end points are the dispatch consoles, the PCs running RadioPro Dispatch, Solo or Talk, programming and management laptops, and servers such as the MCN Server. Because these machines carry live voice, an unprotected one is a risk to operations, and a badly configured protection product is a common source of "it worked until the security update" calls. This article covers what the term includes, and how to deploy it without breaking the radio applications.

What endpoint protection includes

Layer What it does
Antivirus / anti-malware Scans files as they are opened, written or run (real-time or "on-access" scanning) and on a schedule, and blocks or quarantines known malicious code.
EDR (endpoint detection and response) Watches what programs do (behavior) rather than only what they look like, records activity, and lets an administrator investigate and isolate a machine. Often replaces or extends classic antivirus.
Host firewall Allows or blocks network traffic to and from this one computer by program and port (firewall-types-stateful-vs-stateless).
Device control Controls what USB devices may be attached, a concern for radio programming cables and USB-connected modules.
Patching Keeps the operating system and applications updated so known weaknesses are closed. Often managed by the same console.
Disk encryption and application control Protects data on a stolen laptop, and allows only approved programs to run.

Products differ in which of these they bundle, and managed products report every machine to a central console.

What the CTI manuals say

The published MCN documentation treats endpoint protection as expected, not optional:

  • The MCN hardware manual for the EXB-IP module recommends installing the configuration software on a PC with all appropriate information-assurance precautions taken per the network security policies in place, and recommends that anti-virus software and the appropriate Windows hardening kit be installed on that PC.
  • Its list of security recommendations tells users to apply the appropriate Windows hardening kits to the PCs in the system, to use anti-virus and anti-malware packages, and to install security patches for the operating system and for installed software.
  • The MCN Server 8000 manual verifies compatibility with one particular enterprise anti-virus product and version for a specific Windows release (the product and version are named there), which also shows the point that matters: protection software is tested against the radio software, not assumed to be compatible.
  • At the same time, the MCN Server installation and driver-installation steps say that before running the installer, or installing the USB driver for the HIB-IP 8002 module, you should check for and disable any real-time virus protection (the manuals give an on-access scanner as the example), and re-enable it afterward. Real-time scanners can interfere with installers and driver installation.

So the pattern is: keep protection installed and running; pause the real-time scanner only for the short, supervised window of an install if the instructions say so, then turn it back on.

How endpoint protection can break radio applications

Symptom Typical cause
Installer fails, hangs or leaves the program half-installed Real-time scanning or application control blocking files being written
USB module or cable driver will not install Driver blocked, or device control refusing the new USB device
Program starts and then disappears, or a file is missing after an update A file or library was quarantined as a false positive
Choppy or delayed audio, voice drop-outs at regular intervals A scheduled scan or heavy on-access scanning using disk and processor while audio is live (latency-jitter-and-packet-loss-in-voice-networks)
Client logs in but there is no audio, or cannot reach the gateway The host firewall blocking the program, or blocking inbound UDP audio (networking-udp, troubleshooting-roip-and-gateway-connectivity)
It worked until a security product or definition update New detection rules, a new default firewall profile, or a newly enabled feature such as network or web protection
Slow start-up, console freezes while a scan runs Full scans scheduled during working hours

Deploying it without breaking the radio system

  1. Install the products before go-live. Test on a spare PC, or during a maintenance window, not for the first time on a live console.
  2. Follow the radio vendor's installation order. If the manual says to pause real-time protection during installation, do so, then re-enable and confirm it is on.
  3. Create exclusions only as needed and as narrow as possible. Exclude the radio application's own program and data folders and its processes from real-time scanning, and allow its documented network ports, rather than disabling the product. Ask CTI support for the exact list for your product and version; do not guess, and do not exclude whole drives.
  4. Allow the application through the host firewall for the documented ports and protocols, including the UDP ports used for voice.
  5. Schedule full scans for quiet hours, and stagger them across machines.
  6. Test after every update of the protection product, the operating system or the radio software, on one machine first.
  7. Check the logs first when something stops working. The protection product's quarantine and block logs show what it did and when, which is faster than guessing.
  8. Never leave protection switched off as the "fix". If disabling it makes a problem go away, you have found the cause; the answer is an exclusion or rule, not a permanent gap.

Where endpoint protection fits in radio security

Endpoint protection is one layer. It works together with network controls such as firewalls, segmentation and access lists (acl-access-control-list), VPNs for remote access (networking-vpns), strong unique passwords, and keeping radio programming and management software current (radio-management-licensing-and-security). It does not replace them, and it does not make an Internet-exposed service safe (port-forwarding-and-remote-access).

Questions to ask before choosing a product

  • Is the product supported on the Windows version used for the radio software?
  • Can exclusions be managed centrally, and per group of machines?
  • Does it have a low-impact mode for machines carrying live audio?
  • Can it work when the PC is on an isolated network with no Internet, for definition updates?
  • Who gets the alerts, and who is allowed to turn protection off?

Source documents

This article summarizes the following published CTI Products manuals. They are the authoritative reference.

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.