Kenwood NEXEDGE NX 700 800
Key Features
- Digital (NXDN) and FM analog operation on the same radio, supporting a phased migration from analog to digital, with the radio auto-sensing received mode (digital or analog) on a shared channel.
- Channel bandwidths of 25 kHz and 12.5 kHz for FM analog, and 12.5 kHz and 6.25 kHz for NXDN digital (per Kenwood's spec sheet, analog channel spacing on the NX-700 is listed as 12.5/15/25/30 kHz and on the NX-800 as 12.5/25 kHz).
- 512 channels across 128 zones, with a maximum of 250 channels per zone.
- Backlit dot-matrix LCD with 3-digit sub-display, 14-character alphanumeric aliases, and a date/12-24-hour clock.
- Operating modes including analog simplex, analog conventional repeater, analog LTR trunking, analog MPT trunking, digital simplex, digital conventional repeater, site roaming, Conventional IP networking, and digital NEXEDGE trunked networking (up to 8 trunked networks per one vendor's listing). The European NX-700E variant additionally lists multi-site digital trunking supporting up to 60,000 Group IDs and 60,000 Unit IDs per network, plus multi-site IP network compatibility.
- AMBE+2 vocoder for digital voice.
- Optional GPS integration for vehicle location tracking on some dealer-configured systems.
- Encryption options: 16-bit standard, optional DES 56-bit, and optional AES 256-bit.
- Kenwood's signature audio quality with active ANR (noise reduction).
- Dual control head support with optional remote-mount head (KRK-10 kit), 10 programmable front-panel keys, call queuing, late entry, over-the-air programming/firmware updates, and emergency/status messaging.
Power and Frequency
- NX-700 (VHF): 136–174 MHz, with power output figures reported as low as 1 W up to 30 W standard, or up to 50 W on the high-power NX-700H.
- NX-800 (UHF): 400–470 MHz or 450–520 MHz depending on variant, with output up to roughly 25–45 W (up to 45 W on the high-power NX-800H).
Additional Specifications (per Kenwood spec sheet)
- Dimensions: 6.30 x 1.77 x 6.18 in (160 x 45 x 157 mm), projections not included.
- Weight: 3.04 lb (1.38 kg).
- Operating voltage: 13.6 V DC ± 15%.
- Operating temperature range: -22°F to +140°F (-30°C to +60°C).
- Frequency stability: ± 1.0 ppm.
- Antenna impedance: 50 Ω.
- Digital receiver sensitivity at 6.25 kHz: 0.20 μV; analog sensitivity: 0.25 μV.
- Audio output: 4 W at 4 Ω.
- IC certification: NX-700 = 282F-378600; NX-800 = 282F-378701.
Typical Use Cases
Fleet and land-mobile users needing mixed analog/digital operation during a transition to NXDN digital, including conventional repeater systems and legacy analog trunking (LTR/MPT) support alongside new NEXEDGE digital and trunked networking.
Related Pages
- Kenwood NEXEDGE Overview
- Kenwood NEXEDGE NX-720/NX-820
- Kenwood NEXEDGE NX-3720/NX-3820
- Kenwood NEXEDGE NX-5700/NX-5800
- NXDN Digital Standard
- Kenwood NXR Repeaters
- Programming Kenwood NEXEDGE Radios
References
- NX-700_800 VHF/UHF Digital & FM Mobile Radios - NEXEDGE KENWOOD
- NX-700_800 Specifications - NEXEDGE KENWOOD
- NX-700(H)/800(H) Brochure (PDF)
- NX-700 Series/NX-800 Series Manual (PDF)
- NX-700(H) VHF & NX-800(H) UHF Mobile Radios - MRA
- KENWOOD NEXEDGE NX-700 SPECIFICATIONS - ManualsLib
- NEXEDGE Models - Two-way Radio - Products | KENWOOD
- Mobile Radios - NX-700E Specifications - KENWOOD Europe
- NX-700 vs NX-720 - used market value - RadioReference.com Forums
See also: CTI product documentation
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.