Motorola MOTOTRBO XPR 2500

Motorola and P25 Systems · Last updated · About 4 min read

Form Factor

  • Vehicle-mount mobile radio (dash or remote mount)
  • Compact chassis: 1.7" H x 6.7" W x 5.3" D (44 x 169 x 134 mm), weighing 2.9 lbs (1.3 kg)
  • Monochrome, alphanumeric display
  • IP54 rated for dust and spill resistance (rating applies with the microphone sealing boot and rear accessory connector cover properly installed)
  • Built to meet MIL-STD-810 C/D/E/F/G standards for shock, vibration, temperature extremes, humidity, and other environmental stress tests
  • Operating temperature range of -30°C to +60°C; storage range of -40°C to +85°C
  • Backed by a two-year standard warranty (US and Canada), with a minimum one-year warranty on Motorola-branded accessories

Band Options and Power

  • VHF: 136–174 MHz, with power output options of 1–25 W (low) or 25–45 W (high)
  • UHF Band 1: 403–470 MHz, with power output options of 1–25 W (low) or 25–40 W (high)
  • Channel capacity: 128 channels, at 12.5 kHz or 25 kHz spacing (25 kHz not available for U.S. Part 90 operation due to FCC narrowbanding rules)
  • Frequency stability: ±0.5 ppm
  • Rated audio output: 4 W internal speaker, 7.5 W external (8-ohm speaker), or 13 W external (4-ohm speaker)
  • Current drain: 0.81 A max standby, 2 A max receive at rated audio, up to 11.0–14.5 A max on transmit depending on power tier
  • Uses the AMBE+2 digital vocoder and conforms to the ETSI TS 102 361-1, -2, -3 DMR digital protocol

Digital and Analog Capability

The XPR 2500 supports both analog and digital (DMR) operation, allowing an organization to continue using its existing analog infrastructure while transitioning to digital voice over time rather than needing to switch everything at once. Analog and digital channels can be configured concurrently on the same radio, and channel scanning can be digital-only, analog-only, or mixed mode.

Key Features

  • Intelligent Audio, which automatically adjusts radio volume to compensate for background noise
  • Over-the-Air Programming (OTAP), which can manage, write, and read up to 5,000 radio configurations remotely
  • Basic privacy standard, with enhanced (scrambling) privacy available as a software upgrade option
  • Transmit Interrupt: decode capability standard, with encode available as an upgrade option, to let a dispatcher or supervisor interrupt and clear a busy channel
  • Dual Capacity Direct Mode, one-to-one and group calling, caller ID, call forwarding, lone worker, time-out timer, talkaround mode, and voice announcement (channel/zone changes announced audibly so drivers don't need to look at the radio)
  • Support for IP Site Connect (wide-area linked coverage), MOTOTRBO Capacity Plus (single-site trunking for over 1,000 users without needing additional frequencies), and Linked Capacity Plus (wide-area trunking)
  • Compatible with Motorola Original/IMPRES audio accessories and Motorola's Radio Management Suite for batch programming
  • Digital Mobile Radio (DMR) standards compliant and narrowbanding compliant

Position in the MOTOTRBO Lineup

The XPR 2500 sits at the entry tier of Motorola's mobile-radio range, below the mid-tier XPR 4550 and the upper-tier XPR 5550/XPR 5550e:

Model Tier Display Channel Capacity GPS Bluetooth Notable limits
XPR 2500 Entry Monochrome, alphanumeric 128 No No No color display, no Bluetooth/GPS, basic feature set
XPR 4550 Mid Alphanumeric — Yes No Adds GPS and alphanumeric display over the 2500
XPR 5550 Upper Full-color, 4-line Up to 1,000 Yes Yes (2.1) Adds color display, Bluetooth, up to 1,000 channels
XPR 5550e Current/"e" Full-color, 4-line Up to 1,000 Yes (enhanced) Yes (4.0) Adds Wi-Fi, indoor/outdoor location, improved audio

This makes the XPR 2500 the appropriate choice when an organization's main goal is simply migrating a basic analog mobile fleet to digital voice at the lowest cost, without needing GPS fleet tracking, Bluetooth accessories, or a full-color graphical display — those needs point toward the XPR 4550 or XPR 5550/XPR 5550e instead. Its 128-channel capacity is also notably lower than the up-to-1,000-channel capacity of the 5000-series mobiles, reflecting its role as a simpler, lower-capacity radio for smaller channel plans.

Typical Use Cases

Fleet and vehicle-based communication for transportation, logistics, school-bus/pupil transportation, and general commercial operations that want a straightforward, cost-effective digital-capable mobile radio without the advanced data features (GPS, full-color display, Bluetooth) found on higher-tier XPR 4000/5000-series mobiles. Because the XPR 2500 supports IP Site Connect, Capacity Plus, and Linked Capacity Plus, it can still participate in wide-area or trunked systems even though it lacks the data-rich features of the 5000-series — for example, as a basic dispatch/voice radio riding alongside higher-tier mobiles on the same trunked system.

References

See also: CTI product documentation

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.