Networking: VLAN
What a VLAN Is
A Virtual LAN (VLAN) is a way to logically segment a single piece of physical network switching infrastructure into multiple separate networks that behave as if they were physically separate, even though they run over the same cabling and switch hardware. The standard that defines how this works on Ethernet networks is IEEE 802.1Q, which specifies a 4-byte "VLAN tag" inserted into an Ethernet frame. That tag carries a 12-bit VLAN Identifier (VID, allowing VLAN numbers 1–4094) that tells switches which VLAN a given frame belongs to, plus a 3-bit priority field usable for QoS. A switch port can be configured as an "access port" carrying only one untagged VLAN's traffic (typically how an end device like a PC or a piece of infrastructure connects in), or as a "trunk port" carrying multiple VLANs' tagged traffic at once between switches.
Each VLAN forms its own separate broadcast domain — broadcast and multicast traffic on one VLAN stays confined to that VLAN and is not flooded across the whole physical network, and by default devices on different VLANs cannot talk to each other at all unless a router or Layer 3 switch is explicitly configured to route between them.
Why VLANs Are Used
- Security segmentation. Keeping different classes of traffic and devices in separate broadcast domains limits which devices can even see or reach each other, restricting inter-VLAN communication to only the paths an administrator explicitly allows through routing/firewall rules.
- Traffic isolation. Problems on one VLAN — congestion, a misbehaving device, a broadcast storm — stay contained to that VLAN rather than affecting every device on the shared physical switch.
- Reducing broadcast traffic. As a network grows, broadcast/multicast traffic that would otherwise flood every device on a large flat network is instead confined to smaller VLAN-scoped domains, improving overall network efficiency.
- No separate physical cabling required. Because VLAN separation is done through tagging rather than physically distinct switches and cabling, one investment in switching hardware can serve multiple logically-independent networks.
Related Pages
References
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.