Motorola APX 4500

Motorola and P25 Systems · Last updated · About 2 min read

P25 Compliance

The APX 4500 supports multiple P25 and legacy trunked/conventional operating modes:

  • Digital trunking: APCO P25 Phase 1 (FDMA) and Phase 2 (TDMA) at 9600 Baud
  • Analog trunking: legacy systems such as SmartNet, SmartZone, and Omnilink at 3600 Baud
  • Digital conventional: APCO P25 conventional operation
  • Analog conventional: Analog MDC-1200 and Quik Call II signaling

This mixed-mode support lets an agency operate on modern P25 trunked systems while remaining compatible with legacy analog infrastructure during a transition period.

Band Options and Power

The APX 4500 is available in single-band configurations covering the standard public-safety bands:

  • VHF: 136–174 MHz, 10–50 W
  • UHF Range 1: 380–470 MHz, 10–40 W
  • 700 MHz: 764–776 MHz and 794–806 MHz, 10–30 W
  • 800 MHz: 806–824 MHz and 851–870 MHz, 10–35 W
  • 900 MHz: 896–902 MHz and 935–941 MHz, 1–30 W or 1–3 W depending on configuration

Key Features

  • Channel capacity of 512 standard, expandable to 1,000
  • Integrated hardware encryption, including support for ADP and 256-bit AES algorithms
  • IP56 durability rating for wet, dusty, and hazardous conditions
  • Impact detection that automatically alerts dispatch
  • Integrated Wi-Fi for rapid software/firmware updates
  • Integrated Bluetooth for wireless communication with commercial off-the-shelf (COTS) accessories
  • Rugged O2 control head option with an oversized knob and color screen

Typical Use Cases

Mobile (vehicle-mounted) radio for public-safety first responders — police, fire, and EMS agencies — operating on P25 trunked or conventional systems, where mission-critical reliability, encryption, and interoperability with regional/statewide P25 networks are required. This differs from MOTOTRBO mobiles like the XPR 5550, which target commercial and industrial fleets rather than public safety.

References

See also: CTI product documentation

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.