Motorola MOTOTRBO Network Ports

Motorola and P25 Systems · Last updated · About 2 min read

This page enumerates the standard TCP and UDP ports used on an IP-networked MOTOTRBO system — repeaters, control stations, MNIS Gateways, and related applications — as documented by Motorola's CPS configuration options and corroborated by community-maintained references. Ports marked "fixed" below cannot be changed in configuration; all others are the documented defaults and can typically be reconfigured if there's a conflict with something else on the network.

TCP Ports

Port Service Notes
23 Telnet Router/switch setup only — fixed
80 Repeater status/diagnostic web pages Fixed
443 Radio Management (RM) client login Fixed
5020 MNIS Control See MNIS Gateways
8080 ESU (network management / software update) Fixed
8675 Radio Management Fixed
9090 System Advisor Fixed

UDP Ports

Port Service Notes
123 NTP (time synchronization) See NTP — fixed
4001 Location services (GPS/AVL) See GPS
4005 ARS (Automatic Registration Service) Fixed
4007 TMS (Text Messaging Service / Text Messaging Protocol) Radio and PC application both listen on this port by default
4008 Telemetry
4012 Battery Management
4061 TMS — reserved for option board use
4066 TMS — reserved for non-IP peripheral use
4502, 35003, 36002 System Advisor
50000 Trunking Controller
50005 Status Agent
50015 Registrar
50111 Call Monitoring
51919 Trunking Controller Intermediary
58041 IMPRES Fleet Management (battery/accessory fleet management)
60000–65535 Inter-site/intra-site traffic Range, not a single port

References

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.