RadioPro Link: Reach a RadioPro IP Gateway Over Starlink, Cellular and CGNAT
RadioPro Link gives a RadioPro IP Gateway a stable remote endpoint, so Dispatch, Solo, Talk and ICU can reach it over Starlink, cellular or CGNAT connections without a static public IP address or port forwarding.
RadioPro Link is a CTI Products service that gives each RadioPro IP Gateway a fixed endpoint URL. RadioPro Dispatch, Solo, the Talk mobile app and ICU can then reach the gateway from anywhere, even when the gateway sits behind Starlink, a cellular modem or any other internet connection that uses carrier-grade NAT (CGNAT). In most cases it needs no static public IP address, no port forwarding, no customer-built VPN and no request to the internet provider. The product page is RadioPro Link.
Why remote access breaks on Starlink and cellular
Many internet providers, including Starlink and most cellular carriers, put their customers behind carrier-grade NAT (CGNAT). The site's router shares one public address with other subscribers, so an inbound port-forwarding rule has nothing to attach to and cannot open a path to the gateway. Remote clients lose their connection, and remote configuration with ICU stops working. For the general mechanism see nat-network-address-translation, and for the usual workaround on ordinary connections see port-forwarding-and-remote-access.
How RadioPro Link works
RadioPro Link replaces the site's changing public IP address with a stable endpoint that CTI provisions. Clients connect to that endpoint, and the gateway reaches it from the inside, over whatever internet connection the site has. Traffic is carried over a single port using encryption tunneling, so it is encrypted end to end. Because the gateway makes the outbound connection, the site's router normally needs no changes.
Getting started:
- Choose a name for each gateway.
- CTI provisions the endpoint and ships a preconfigured gateway.
- Connect the gateway to any internet connection.
- Point the clients at the endpoint URL instead of an IP address.
With DHCP enabled on the gateway, a Link gateway can move between networks, for example from wired fiber to Starlink to an LTE hotspot, and the clients keep using the same endpoint. RadioPro Link supplies the network path only. The gateway still needs a working internet connection, and the control-station radio still needs RF coverage of the field radios.
Features
| Feature | RadioPro Link |
|---|---|
| Works behind CGNAT (Starlink, cellular) | Yes |
| No static public IP address required | Yes |
| No port forwarding or customer-built VPN | Yes, for typical setups (see the note below) |
| End-to-end encryption (encryption tunneling) | Yes |
| Move between internet connections | Yes |
| Automatic reconnection | Yes |
| Remote configuration with ICU | Yes |
Typical Starlink and default-router setups need no network changes. A network with strict outbound policies may need an allow rule for the provisioned service. The CTI FAQ answers Does RadioPro Link require a static public IP address or port forwarding?
Supported applications
RadioPro Link changes the network route, not the application. These RadioPro applications can connect to a gateway through its Link endpoint:
| Application | Platform | Use through Link |
|---|---|---|
| RadioPro Dispatch | Windows PC | Full radio-console access to the licensed gateway connections |
| RadioPro Solo | Windows PC | Single-channel access to one gateway at a time |
| RadioPro Talk | iPhone, iPad and Android | Push-to-talk over Wi-Fi, LTE or 5G |
| ICU (IP Gateway Configuration Utility) | Windows PC | Remote gateway configuration with an administrative account |
The applications are described in RadioPro Dispatch, RadioPro Solo and RadioPro Talk. Gateway accounts, client permissions and RadioPro licenses still apply. Contact CTI or a dealer to confirm compatible gateway and client versions. The gateway, ICU and client versions that support encryption tunneling change over time, so check the current release notes on the RadioPro upgrade downloads page or ask CTI.
Starlink field test results
In September 2026 CTI tested RadioPro Link over a Starlink Mini on the Roam plan, with a RadioPro client on wired office internet. The figures are client-to-gateway network timing. They do not include radio call setup or the RF path.
| Condition | Typical round trip | Outage time |
|---|---|---|
| Starlink, stationary | 64 ms | None observed |
| Starlink, highway motion | 64 ms | None observed |
| Starlink, in-town motion | 68 ms | 1.4% |
| Wired reference (also through Link) | 49 ms | None observed |
In-town outages lasted roughly 5 to 10 seconds each, most likely because buildings and trees obstructed the dish. The Link connection recovered automatically every time. These are results from one test configuration and are not an uptime or performance guarantee for another site. See the full Starlink Mini test results. For background on Starlink itself see satellite-communications-starlink, and for what latency does to voice see latency-jitter-and-packet-loss-in-voice-networks.
Basic Dispatch testing over a Verizon 4G LTE MiFi showed no noticeable added audio latency. Geostationary satellite links work mainly for remote configuration, because their latency of 500 to 600 ms is high for live voice.
Where RadioPro Link fits
- Disaster recovery: stand up dispatch on Starlink when wired service is down.
- Rural and remote sites: where satellite or cellular is the only option.
- Mobile base stations: gateways in vehicles or trailers that move between locations.
- Temporary job sites: move the gateway between projects without reconfiguring the clients.
- Remote management: configure gateways with ICU without visiting the site.
- Simplified setup: no router changes or IT tickets for typical installations.
- ISP-agnostic: switch internet providers without changing client settings.
- Backup path: keep a secondary connection ready behind the primary one.
Related CTI resources
- Starlink and CGNAT support announcement
- RadioPro Link FAQ
- What is RadioPro Link, and when would I use it?
- radiopro-ip-gateway-installation-and-configuration: installing and configuring the gateway that Link connects to.
- RadioPro systems are sold through authorized two-way radio dealers. Use the Find a Dealer page, or contact CTI Products.
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.