Upgrading a RadioPro System: Gateway Firmware, Dispatch Software, Licenses and PC Replacement

RadioPro and CTI Products · Last updated · About 4 min read

How RadioPro IP Gateway software is upgraded (field or return), how licenses are expanded, how Dispatch is upgraded and how a console is moved to a replacement PC.

This article summarizes the RadioPro System Upgrade Guide. It applies to IP Gateways and to RadioPro Dispatch consoles. Order of work: when clients and gateways are both being upgraded, it is usually better to upgrade the gateways first, then the clients. Compatibility between versions is in radiopro-ip-gateway-overview.

Gateway software: field upgrade or return

The upgrade table in the guide, read as to version against from version:

To \ From Version 8 Version 9
Version 8 Field RMA (a downgrade)
Version 9 RMA Field

"Field" means the gateway can be upgraded where it is installed; "RMA" means it has to be returned to CTI Products through the return-material-authorization process. Upgrading a gateway to version 8 or 9 from versions 4 through 7 also requires return to CTI. Some software downgrades require return.

CTI's Advance Loan Program exists for customers whose older gateways (software between 5.1 and 6.x) must be upgraded at CTI's facility with minimal down-time: up to four loaner gateways can be supplied, configured, swapped in, and later returned. Gateways at version 5.0 and earlier are too old to upgrade and must be replaced; gateways at version 7.0 and higher can be upgraded in the field.

Three field methods

All start with downloading the latest gateway software package (a RadioPro_Gateway...zip file) from the RadioPro upgrade downloads page.

  1. Remote, using the Dispatch client. In Edit mode, Options, Manage IP Gateways, right-click the gateway and choose Upgrade Gateway, pick the downloaded file and enter the gateway password.
  2. Remote, using ICU. Run ICU (version 8.3.1 or later), Read Device, Auto Find, open the gateway, enter its password, then on the General tab choose Upgrade Firmware and pick the file.
  3. Local, using a USB flash drive. Put the package on a USB flash drive (make sure there is only one such file and its name does not already contain "Installed", which the gateway adds after using a file), insert it into the gateway, wait about a minute while it updates and reboots, then remove it.

The gateway goes off-line for about a minute during the upgrade. Afterwards verify the version in Manage IP Gateways, or in ICU's General tab (check ICU's own version with Help, About). Repeat for every gateway.

Gateway license expansion

A license that adds Solo and Talk connections or gateway features can be bought at any time; reducing a license requires returning the gateway to CTI. The process:

  1. Export the current license: in ICU, License Key tab, Export License Key (the ICU version must match the gateway version); or, with a Solo client logged in as the administrator, Settings, Update License, Get License Key.
  2. E-mail the file to CTI support.
  3. Import the new file: ICU License Key tab, Import License Key, then Gateway, Write Settings with the gateway password; or Solo's Set License Key.
  4. Verify the increased number of User Connections.

Dispatch software upgrade

  • A new license file is required when moving to a new major version (version 7 or higher). Contact CTI with the serial numbers of the existing keys. The installer is named RadioPro_Dispatch_vxxx.exe and comes from the same downloads page.
  • Document the existing installation first: screenshots of the main page (custom action buttons, tabs and panel positions); the location and names of the layout files (.tdcfg and .xml), AudioSettings.cfg and aliasTable.csv (each reachable from the link at the bottom left of its settings window).
  • Run the installer without uninstalling the previous version, accept default locations, make sure Run as administrator is enabled, start the new client, choose Import New License, and reapply configuration as needed.
  • From version 6 or earlier to version 7 or later, several configuration files (aliasTable.csv, the dispatch users file and AudioSettings.cfg) move from the old TurboVUi program-data folder to a CTI Products RadioPro folder.

Dispatch license expansion

Optional modules (Voice, GPS Mapping, Text Messaging, Telemetry, Remote I/O) can be added at any time. The license file is License.key in the program folder; send it to CTI support, then import the expanded file in Edit mode (Options, Update License, Import License Key). Reducing options is not possible.

Replacement PC

For version 7 and later, on the old PC use Edit mode, File, Clone Settings and copy the .trbodat file; on the new PC install Dispatch, enter Edit mode and File, Import Cloned Settings. For version 6 and earlier the layout, alias, audio settings and license files are copied by hand. See radiopro-dispatch-layout-gateways-and-licensing.

Timed licenses

Software or gateways may ship with a timed license, after which the software does not function. Dealer demo kits shipped after June 1, 2015 carry a license that expires 12 months after shipment and is renewed on request while the kit is used to sell RadioPro. Gateways can carry a 120-day timed license (radiopro-ip-gateway-installation-and-configuration). To update, use the license expansion steps above.

Source documents

This article summarizes the following published CTI Products manuals. They are the authoritative reference.

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.