Two-Tone Paging and Quik-Call
Two-tone sequential paging is a decades-old analog signaling method used to selectively alert pagers, station receivers, and radios — and it remains in heavy daily use, especially by volunteer and combination fire departments. A dispatcher "sets off the tones" for a station or unit, the matching pagers open and sound an alert, and the voice dispatch follows. Despite the rise of digital systems, two-tone paging persists because it is simple, works over plain analog FM (frequency modulation) channels, and an entire generation of fire-service workflow is built around it.
How Two-Tone Sequential Paging Works
A two-tone page consists of two audible tones sent one after the other. For Motorola Quik-Call II the timing is standardized and precise:
| Element | Duration |
|---|---|
| A tone (first) | 1 second |
| B tone (second) | 3 seconds |
| Gap between them | None — no silence gap |
The two tones are non-harmonically related audio frequencies selected from standardized tone groups, transmitted over FM and followed immediately by microphone audio. The pair of tones, in order, forms the address: a pager opens only when it hears its specific A tone followed by its specific B tone within the expected timing. With dozens of standard tones available for each position, a modest channel can address hundreds of distinct pagers or stations.
(The "no gap" detail matters in practice — an encoder that inserts silence between the tones, or a decoder expecting one, is a real source of missed pages.)
After the tone pair, the dispatcher (or an automated system) transmits the voice announcement — "Station 4, respond to..." — which the alerted pagers pass through to their speakers. This "tone-and-voice" pattern is the standard fire dispatch sequence.
Group pages alert multiple units at once. A common convention uses a single long tone (rather than a pair) to trigger every pager sharing that tone, and departments also stack multiple tone pairs back-to-back to alert several stations for a working incident.
Quik-Call II
Quik-Call II is Motorola's widely used two-tone sequential format, and in North American fire service the name is nearly synonymous with two-tone paging — other vendors (GE/General Electric, Plectron, Federal Signal, and others) historically defined their own tone groups, but Quik-Call II tone plans became the common ground. When a customer says "our Quik-Call tones," they mean the two-tone pairs assigned to their stations and units. (The original Quik-Call format used simultaneous tones; the sequential Quik-Call II style is what survives in general use.)
Voice Pagers
The receiving device is often a dedicated voice pager — a small belt-worn receiver rather than a two-way radio. Motorola's Minitor series is the archetype: it monitors the dispatch channel silently, opens on its programmed tone pair, sounds a loud alert, and plays the voice dispatch, typically with stored-voice replay so a firefighter can re-listen to the address. Many two-way radios (including modern digital models operating in analog mode) can also decode two-tone pages, letting a portable radio double as a pager.
How Dispatch Sends Pages
At the dispatch center, a paging encoder generates the tone sequences.
Modern Alternatives
Departments increasingly supplement two-tone paging with digital paging protocols (such as POCSAG, a one-way digital paging standard), IP-based fire-station alerting systems that ring lights and speakers in the station, and smartphone alerting apps that push CAD incidents to members' phones. In practice these are additions rather than replacements: the analog tone-and-voice page over the radio channel is prized for its reliability and independence from cellular and internet infrastructure, so most agencies keep it as the primary or fallback alerting path.
Related Pages
References
- Motorola Quick Call 2 ("QC2") — Genave — the 1 second / 3 second timing with no silence gap, and the two non-harmonically related tones followed by microphone audio.
- Two-tone paging — Genave
- Motorola two-tone and four-tone paging charts (PDF) — Midian Electronics — the standard tone-group frequency tables.
- Signaling methods for radio systems — MRA — where two-tone sits among the other analog selective-calling schemes.
- QuikCall I vs QuikCall II — RadioReference — background on the simultaneous-tone original versus the sequential format in general use.
Quik-Call II timing verified August 2026. Tightened: an earlier revision gave the timing as "commonly around one second" / "around three seconds"; the standard is precisely 1 s / 3 s with no gap, and the no-gap detail has been added because it is a real cause of missed pages.
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.