Networking: MAC Addresses

Networking · Last updated · About 2 min read

What They Are

A MAC (Media Access Control) address is the hardware-level identifier burned into (or assigned to) every network interface — Ethernet port, Wi-Fi adapter, or the network interface inside a radio gateway. It's a 48-bit value written as six hex pairs (00:1A:2B:3C:4D:5E). Where an IP address says where a device sits in the network's logical layout (and changes when the device moves networks), the MAC identifies the physical interface itself and normally stays constant for the life of the hardware.

The first three bytes are the OUI (Organizationally Unique Identifier) — a vendor prefix assigned by the IEEE — which is why network tools can often name a device's manufacturer from its MAC alone. Useful trick: an unknown device on a radio-site LAN can frequently be identified by vendor (a Motorola OUI, an Advantech OUI, etc.) before anyone physically traces a cable.

Where MACs Do the Work

  • Local delivery: on an Ethernet segment, frames are addressed MAC-to-MAC; ARP (IPv4) or NDP (IPv6) is the translation step from IP to MAC. Switches forward frames by learning which MAC lives on which port (see Switches, Routers, and Hubs).
  • DHCP reservations: a DHCP server pins a fixed IP to a device by its MAC — the standard middle ground between static addressing and dynamic pools for infrastructure like gateways.
  • Access control: switch port security and Wi-Fi MAC filtering gate connectivity by MAC — useful housekeeping on a controlled radio-site LAN, but weak as a security control, since MACs transmit in the clear and most interfaces can be told to present any MAC ("spoofing"). Treat MAC filtering as accident prevention, not an authentication mechanism (real access control lives at firewall/ACL and authentication layers).

Scope: MACs Don't Cross Routers

A MAC address only matters within its local layer-2 segment. The moment traffic crosses a router, the frame is rebuilt with the next hop's MACs — the original sender's MAC never appears on the far side. Practical consequences:

  • You can't "find a device by MAC" from another subnet; MAC-based hunting happens on the segment (switch MAC tables, ARP caches).
  • Modern phones/laptops randomize Wi-Fi MACs for privacy by default, which quietly breaks MAC-reservation/filtering assumptions for those clients — relevant when a site network expects stable MACs from, say, a tablet running a dispatch client.

References

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.