RadioPro Dispatch Demo and Quick Start

RadioPro and CTI Products · Last updated · About 3 min read

How to install the RadioPro Dispatch demo client, connect it to CTI's demo radio system and set up audio and recording for a test drive.

The RadioPro Dispatch demo lets you try RadioPro Dispatch without owning any RadioPro hardware. Software downloaded from CTI's site is preconfigured to talk to a demo radio system at CTI's Cincinnati, Ohio location, so a demo user can communicate with CTI staff and other demo users. Demo software can be downloaded from the RadioPro demo downloads page. The same demo system is used by the Solo and Talk clients.

In demo mode a Dispatch client connects only to the CTI demo system, and no license file is needed. A client with a real license connects to your own IP Gateways instead.

Quick start

  1. Download the RadioPro demo client and run the installer. Choose a language and accept the defaults.
  2. Make sure the client runs as administrator. Right-click the desktop icon, choose Properties, then on the Shortcut tab choose Advanced and check "Run as administrator".
  3. Start the client. When the Import License window appears, choose Start demo mode, then choose All features to try both voice and GPS/AVL.
  4. The first screen shows four channels on a tab named "Voice - Expanded", and a second tab, "Voice - Simple", with the same four channels and fewer controls.
  5. Set the audio devices (Edit mode: File, Edit; then Options, Audio Presets, Configure, Devices). For the Default preset choose a microphone under Mic In and an output device for Select Out, Unselect Out and Intercom Out. For a demo the same device can be used for all three. A notebook's built-in microphone and speakers work, but a USB microphone or headset sounds better.
  6. Optionally enable voice and event recording (Options, Dispatch Settings, History Logging). The operating-system partition cannot be used; use a second disk or partition or a network location. For a demonstration only, a USB thumb drive can be used.
  7. Return to Lock mode (File, Lock) to save the configuration.

What the demo screen shows

The main window has a toolbar, a Subscribers list, map tabs, voice tabs of Radio Controllers, a Text Messaging and Missed Calls area, and Recent History and Geo-fence Alerts tabs. Panels can be hidden, rearranged, or undocked onto another monitor. Each element is described in the other Dispatch articles:

When you are ready for your own system

Building your own configuration involves installing the client, loading the license, configuring the gateways with the ICU utility and adding them to the layout. See radiopro-dispatch-layout-gateways-and-licensing and radiopro-system-planning-for-mototrbo.

Source documents

This article summarizes the following published CTI Products manuals. They are the authoritative reference.

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.