RadioPro Dispatch Feature Availability by MOTOTRBO and NEXEDGE System Type

RadioPro and CTI Products · Last updated · About 2 min read

Which RadioPro Dispatch features (text, GPS, ARS, private call, remote monitor and more) work on each MOTOTRBO and NEXEDGE system type.

Not every RadioPro Dispatch feature works on every radio system type. What is available depends on what the radio system itself supports, and RadioPro Dispatch follows it.

Motorola MOTOTRBO systems

Feature Analog Conventional digital Capacity Plus IP Site Connect Linked Capacity Plus Connect Plus
Voice dispatch Yes Yes Yes Yes Yes Yes
Text messaging No Yes Yes Yes Yes No
GPS mapping No Yes Yes Yes Yes No
ARS (automatic registration) No Yes Yes Yes Yes No
Private call No Yes Yes Yes Yes Yes
Remote monitor No Yes Yes Yes Yes Yes
Remote enable/disable No Yes Yes Yes Yes Yes
Telephone interconnect record/monitor No Yes Yes Yes Yes Yes

The installation guide adds a Capacity Max column to its version of this table. See mototrbo-capacity-plus, ip-site-connect, mototrbo-linked-capacity-plus, mototrbo-capacity-max and motorola-mototrbo-overview for background on the system types, and ars-automatic-registration-service for ARS.

Kenwood NEXEDGE systems

Feature Analog Analog with FleetSync Digital NXDN Digital NXDN with call acknowledge NXDN and LTR trunking NXDN trunking (message trunked)
Voice dispatch Yes Yes Yes Yes Yes Yes
Text messaging No Yes Yes Yes Yes Yes
GPS mapping No Yes Yes Yes Yes Yes
Status updates No Yes Yes Yes Yes Yes
Selective calling No Yes Yes Not currently supported Yes Not currently supported
Remote monitor No Yes Yes Yes Yes Yes
Remote enable/disable No Yes Yes Yes Yes Yes

See kenwood-nexedge-overview and nxdn-digital-standard for background.

Requirements for GPS mapping

The installation guide lists what has to be true for subscriber positions to reach the map:

  • The IP Gateways must have GPS enabled in the IP Configuration Utility (ICU).
  • The control-station radios must not have GPS or ARS enabled.
  • The subscriber radios must have GPS and ARS enabled.

See radiopro-dispatch-gps-mapping-and-geo-fences.

Minimum control-station radio firmware

The control-station radio connected to an IP Gateway must be at or above these versions:

Control-station radio Minimum version
MOTOTRBO in Conventional, IP Site Connect, Capacity Plus or Linked Capacity Plus 1.08.0
MOTOTRBO in Connect Plus mode 2.2.0
MOTOTRBO Connect Plus option board 1.3.0
Kenwood NEXEDGE NX-800 1.23.00

See radiopro-supported-control-station-radios.

Source documents

This article summarizes the following published CTI Products manuals. They are the authoritative reference.

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.