Radio Terminology Glossary

Two-Way Radio Concepts and Electronics Fundamentals · Last updated · About 14 min read

ADC / DAC (Analog-to-Digital / Digital-to-Analog Converter) The circuits that turn real-world analog signals into digital samples and back.

Admit Criteria A digital radio programming setting that controls when a radio is allowed to transmit on a channel — for example "Always" (transmit regardless of channel activity) or "Channel Free" / "Color Code Free" (wait until the channel is idle). Mis-set admit criteria are a common cause of "my radio won't key up" complaints. See Common Radio Programming Parameters.

Affiliation / Registration In a trunked radio system, the process by which a radio announces itself to the system (and to a specific talkgroup) on the control channel so the system knows where to route calls. In MOTOTRBO data systems, radios register via ARS.

All Call / Announcement Group A special group call that reaches every radio on a system or site regardless of selected talkgroup, typically reserved for supervisors or dispatch-wide announcements. See Talkgroups and Fleet Mapping.

ANI (Automatic Number Identification) Signaling that transmits a radio's unique identifier when it keys up, so dispatchers and consoles can display who is talking.

ARS (Automatic Registration Service) The MOTOTRBO service by which a radio registers its presence (and IP reachability) with a data application server when it turns on or changes sites. See ARS.

ATR (Air Traffic Router)

AVL (Automatic Vehicle Location) Tracking vehicle positions using GPS data reported over the radio system (or another data path), typically displayed on dispatch maps. See GPS and Dispatch Mapping.

Band A range of radio frequencies grouped together for a particular use, such as VHF or UHF.

Base Station A radio permanently installed at a fixed location (office, dispatch center, tower site), typically powered from AC mains with an elevated antenna. Compare Base Station vs. Mobile vs. Portable Radio Classes.

CAI (Common Air Interface) The P25 standard defining how compliant radios from any manufacturer modulate and frame their over-the-air signals, enabling multi-vendor interoperability.

CEN (Customer Enterprise Network)

CGNAT (Carrier-Grade NAT) An ISP-side address-sharing scheme (standard on cellular and LEO-satellite internet like Starlink) that makes inbound port forwarding to a customer device impossible. A recurring obstacle for remote RoIP clients — see Port Forwarding and Remote Access.

Channel A specific, defined frequency (or paired frequencies) that a radio is tuned to for transmitting and receiving. In digital systems a "channel" as programmed in a radio also includes its digital parameters (color code/RAN/NAC, timeslot, talkgroup).

Codec / Vocoder An algorithm that encodes voice audio into a compressed digital stream and decodes it back to audio. "Vocoder" usually refers to the very-low-bit-rate voice coders used over the air in digital radio (such as AMBE+2); "codec" is the broader term that also covers telephony/network codecs such as G.711 and Opus.

Codeplug The configuration file programmed into a radio — channels, zones, talkgroups, IDs, feature settings. See CodePlug.

Color Code / Talkgroup In digital trunked and conventional systems (such as DMR), a "color code" is an identifier that lets multiple independent repeaters or user groups share infrastructure without their traffic mixing, similar in purpose to an analog CTCSS/PL tone. A "talkgroup" is a virtual channel — a defined group of users on a trunked or digital system who can hear each other's calls, independent of the physical frequency being used at any given moment. See DMR and Digital Access Codes: Color Code, RAN, NAC.

Control Channel In a trunked system, the dedicated channel that continuously carries system signaling — registrations, call requests, and channel grants — rather than voice.

Control Station

COR / COS (Carrier Operated Relay / Carrier Operated Squelch) A logic output from a receiver that asserts whenever the receiver is hearing a valid signal — the fundamental "the channel is active" signal used by repeaters, consoles, and RoIP gateways. See COR and PTT Interfacing.

CSQ (Carrier Squelch) Operating a channel with no tone/code filtering — the receiver unmutes for any carrier on frequency. Standard practice on interoperability channels. Compare PL Tones, CTCSS & DCS.

CWID (Continuous Wave Identification) Automatic Morse code station identification transmitted periodically by repeaters and base stations to satisfy FCC identification requirements.

Data Revert

dB / dBm The decibel (dB) expresses ratios (gain or loss) logarithmically; dBm expresses absolute power relative to one milliwatt. Antenna gain, feedline loss, and receive signal strength are all quoted this way. See Radio Frequency Basics.

De-emphasis / Pre-emphasis Complementary audio shaping used in analog FM: transmit audio highs are boosted (pre-emphasis) and receive audio highs are cut (de-emphasis) to improve signal-to-noise. Whether an audio interface point is "flat" or "de-emphasized" matters greatly when wiring radios to consoles and gateways. See Audio Levels and Radio Interfacing.

Desense (Receiver Desensitization)

Deviation In FM systems, how far the carrier frequency swings with modulating audio. Too much deviation causes distortion and adjacent-channel interference; too little causes weak, quiet audio.

Digital Cliff The abrupt way digital radio fails at coverage edges: near-perfect audio, then brief artifacts, then nothing — versus analog's gradual noisy fade. See Digital Radio Audio Artifacts and Analog vs Digital Radio.

DMR (Digital Mobile Radio) An open digital radio standard using two-slot TDMA, implemented by Motorola as MOTOTRBO. See DMR.

Donor Radio A standard subscriber radio (usually a control station) used to give an external system — console, bridge, or RoIP gateway — access to a radio network, rather than connecting to the network's infrastructure directly.

DTMF (Dual-Tone Multi-Frequency) Telephone-style touch tones used over radio for selective calling, remote control, and phone patch dialing.

Duplex A mode of operation where transmission and reception can happen simultaneously, typically using two separate frequencies (as opposed to simplex).

Duplexer A filter assembly that lets a repeater transmit and receive at the same time on one antenna by isolating the transmit and receive frequencies from each other.

EDACS (Enhanced Digital Access Communications System) The GE/Ericsson/Harris legacy trunking platform, competitor to Motorola's SmartNet generation; long end-of-life.

Emergency Alarm A distress signal (usually a dedicated orange button) that sends the radio's ID to dispatch with highest priority, often with features like hot-mic ambient listening or emergency revert channels. See Emergency / Man-Down Alerts.

ERP (Effective Radiated Power) The power effectively radiated in the antenna's strongest direction — transmitter power minus feedline losses plus antenna gain. FCC licenses commonly limit ERP, not just transmitter output.

Failsoft A degraded fallback mode in trunked systems: if the trunking controller or site link fails, repeaters revert to conventional operation on preassigned channels so users can still talk. See Failsoft Mode.

FCC (Federal Communications Commission) The U.S. government agency that regulates radio spectrum use and licensing.

FDMA (Frequency-Division Multiple Access) A method of allowing multiple users to share spectrum by assigning each user a distinct frequency slice. Used by NXDN and P25 Phase 1. See TDMA vs FDMA.

Fleetmap The documented plan of talkgroups, radio IDs, zones, and channel assignments for an organization's radio fleet. See Talkgroups and Fleet Mapping.

FleetSync Kenwood's proprietary analog signaling protocol (PTT ID, selective calling, status/text) — Kenwood's counterpart to Motorola's MDC-1200; the two do not interoperate.

Frequency The number of times a radio wave oscillates per second, measured in Hertz. See Radio Frequency Basics.

FRS (Family Radio Service) A license-free UHF radio service intended for short-range personal and family use in the U.S.

FSP (Field Service Protocol)

GMRS (General Mobile Radio Service) A licensed UHF radio service offering higher power and more repeater options than FRS.

GPIO (General-Purpose Input/Output) Digital pins on a microcontroller or single-board computer that firmware can read or drive — the wiring point for contacts, relays, and indicators.

Group Call / Private Call The two basic digital call types: a group call reaches everyone on a talkgroup; a private (individual) call reaches a single radio ID. See Radio IDs and Digital Addressing.

Hang Time The brief period a repeater keeps transmitting (or a digital call keeps its channel reserved) after a user unkeys, so replies don't have to re-establish the call. Too-long hang time ties up channels; too-short causes clipped exchanges. See Common Radio Programming Parameters.

Hertz (Hz) The unit of frequency, representing one cycle per second. See Radio Frequency Basics.

ISSI / CSSI / DFSI The three main open P25 IP interfaces: ISSI links two RF subsystems (system-to-system), CSSI links a console subsystem to an RF subsystem, and DFSI links a console/host to a conventional fixed station.

Kerchunk Slang for keying a radio briefly (often to see if a repeater responds) without saying anything. Repeated kerchunking without identifying is poor practice.

LMR (Land Mobile Radio) Traditional terrestrial two-way radio communication using dedicated RF channels and infrastructure (as opposed to cellular/LTE or satellite systems). See LMR Land Mobile Radio.

LTR (Logic Trunked Radio) E.F. Johnson's legacy analog trunking protocol — distributed (no control channel), sub-audible signaling, up to 20 repeaters, identities written area-home-ID (e.g., 0-05-123). Supported by Kenwood NEXEDGE radios.

MDC-1200 A Motorola analog data signaling format (the familiar data burst "chirp") carrying unit IDs, emergency signals, and selective calls on analog channels.

Mixed Mode A repeater or channel configuration that accepts both analog and digital traffic — commonly used during analog-to-digital migrations.

Mobile Radio A radio installed in a vehicle, powered from the vehicle's electrical system with an externally mounted antenna. See Base Station vs. Mobile vs. Portable Radio Classes.

Monitor Temporarily defeating tone/code squelch (often by pressing or holding a dedicated button) to hear all activity on a frequency before transmitting.

MultiSpeak

NAC (Network Access Code) The P25 digital access code (three hexadecimal digits) that a receiver requires before unmuting — the P25 equivalent of a PL tone or DMR color code. See Digital Access Codes: Color Code, RAN, NAC.

Narrowbanding The FCC-mandated shift of many LMR channels to narrower channel bandwidths to conserve spectrum.

NXDN A digital radio standard using FDMA, implemented by Kenwood (NEXEDGE) and Icom (IDAS). See NXDN Digital Standard.

OTAL (Over-The-Air Light)

OTAP (Over-the-Air Programming) Updating radio codeplugs remotely over the radio network instead of with a programming cable.

OTAR (Over-the-Air Rekeying) Distributing new encryption keys to radios over the air, managed from a key management facility — primarily a P25 capability. Distinct from OTAP.

P25 (Project 25) A suite of digital radio standards developed primarily for North American public-safety use. See P25 Project 25.

Patch / Patching Joining two radio channels or talk groups so their audio is shared (a console or gateway function — see Cross-Patching and System Bridging).

PL / CTCSS (Private Line / Continuous Tone-Coded Squelch System) A sub-audible tone system that lets multiple user groups share a channel without hearing each other's traffic. "PL" is Motorola's trade name; DPL/DCS is the digital-code equivalent. See PL Tones, CTCSS, and DCS.

PLL (Phase-Locked Loop) The feedback circuit behind every radio's frequency synthesizer — it locks an oscillator to a stable crystal reference so one radio can generate any programmed channel.

Portable Radio A handheld, battery-powered radio ("walkie-talkie"). Lower power and antenna height than mobiles and base stations, hence shorter range. See Base Station vs. Mobile vs. Portable Radio Classes.

PTT (Push-to-Talk) The button on a two-way radio that must be held down to transmit; releasing it returns the radio to receive mode.

PTT ID The unit identifier sent automatically each time a radio keys up (via MDC-1200 on analog, or embedded signaling on digital), allowing consoles to show who is transmitting.

QoS (Quality of Service) Network mechanisms that prioritize time-critical traffic such as radio voice over IP ahead of bulk data.

RAN (Radio Access Number) The NXDN digital access code that must match between radios and repeaters — NXDN's equivalent of a DMR color code or P25 NAC. See Digital Access Codes: Color Code, RAN, NAC.

RAS (Restricted Access to System) A MOTOTRBO repeater-authentication feature: repeaters reject radios that don't present the correct RAS key. See MOTOTRBO Restricted Access to System (RAS).

Repeater A fixed station that receives a radio signal and retransmits it, often at higher power or from a better location, to extend coverage range. See Repeaters and Antennas Basics.

Repeater Offset / Split The fixed difference between a repeater's input (receive) and output (transmit) frequencies. Subscriber radios transmit on the input and listen on the output.

RNDIS (Remote Network Driver Interface Specification)

RNI (Radio Network Infrastructure)

Roaming A radio automatically moving between sites of a multi-site system based on signal quality, without user action. Distinct from scanning. See MOTOTRBO Roaming.

RoIP (Radio over IP) Carrying radio audio and control (PTT/COR) over IP networks, connecting radios to remote consoles, gateways, and other systems. See RoIP.

RSSI (Received Signal Strength Indicator) A receiver's measurement of incoming signal strength, used for diagnostics, roaming decisions, and coverage checks. See RSSI.

RTP (Real-time Transport Protocol) The standard protocol for carrying live voice packets over UDP in VoIP and many RoIP systems.

SBC (Single-Board Computer) A complete Linux-capable computer on one small board, such as the Raspberry Pi or Banana Pi; the standard platform for prototypes and monitoring appliances.

Scan / Scan List A radio feature that cycles the receiver through a programmed list of channels and stops on activity. Scanning radios can miss the start of calls on other channels — a frequent support complaint. See Channel Scan and Priority Scan.

Select / Unselect (console audio) On a dispatch console, the selected channel gets the primary speaker and the default transmit path; all other monitored channels play as lower-prominence unselect audio. See Dispatch Console Operations Concepts.

Simplex A mode of operation where a channel is used for either transmitting or receiving at one time, but not both simultaneously — the basic mode for most direct, repeater-free two-way radio use. See Simplex Radio Systems.

Simulcast Broadcasting the same signal simultaneously from multiple transmitter sites on the same frequency, with precise timing so the overlap areas remain usable. See Simulcast.

Site Trunking A degraded mode in multi-site trunked systems: a site that loses its link to the system core keeps trunking locally, but users there can only talk to others on the same site.

Squelch A circuit that mutes a radio's receiver audio unless a signal meeting certain criteria (such as strength or matching tone/code) is present, reducing background noise from weak or unwanted signals. See Squelch Types.

Squelch Tail The short burst of noise heard just after a received analog signal drops, before squelch closes. Reverse-burst techniques exist specifically to eliminate it — see Reverse Burst and Squelch Tail Elimination (STE).

Subscriber Industry jargon for an end-user radio (portable or mobile) on a system — as distinct from infrastructure like repeaters and base stations. "Subscriber unit" (SU) appears throughout vendor documentation.

SWR (Standing Wave Ratio) Everyday shorthand for VSWR — the ratio measuring how well an antenna system is matched to the transmitter.

Talkaround Transmitting on a repeater's output frequency to talk radio-to-radio directly, bypassing the repeater — useful when out of repeater range or when the repeater fails. See Talkaround and Direct Mode.

Talk Permit Tone The tone a digital or trunked radio sounds after PTT is pressed once the system grants the channel — users must wait for it or the first words are clipped.

TDMA (Time-Division Multiple Access) A method of allowing multiple users to share a single frequency by dividing transmissions into alternating time slots. Used by DMR and P25 Phase 2. See TDMA vs FDMA.

Time-Out Timer (TOT) A limit on continuous transmission; the radio stops transmitting when it expires. Protects channels from stuck PTTs and transmitters from overheating. See Common Radio Programming Parameters.

Tone Remote An analog console-control scheme using audio tones (e.g., 2175 Hz) over a leased pair or link to key and control a distant base station.

Transmission Trunking vs. Message Trunking Two channel-holding policies in trunked systems: transmission trunking releases the channel the instant the talker unkeys (each PTT may land on a different channel — classic LTR behavior); message trunking holds the channel through a hang time so an exchange stays put. Affects capacity, monitoring, and recording behavior.

Trunking A system design where a pool of channels is shared dynamically among many user groups, with the system automatically assigning an available channel for each call rather than dedicating one channel per group. See Trunked Radio Systems.

Vocoder See Codec / Vocoder above.

Voting Selecting the best copy of a signal received at multiple receiver sites, so weak portables can be heard reliably across a wide area. See Voting Receivers and Comparators.

VOX (Voice-Operated Transmit) Hands-free transmission triggered by detected voice audio instead of a PTT press. Sensitivity must be tuned to avoid false keying or clipped first syllables.

VSWR (Voltage Standing Wave Ratio) A measure of how well an antenna system is matched to the transmitter; high VSWR indicates reflected power from a fault such as a damaged feedline or antenna.

Wavelength The physical distance between successive peaks of a radio wave, inversely related to frequency. See Radio Frequency Basics.

Zone A grouping of channels in a radio's codeplug, used to organize large channel lists (often by geography or department). The user selects a zone, then a channel within it. See CodePlug.

References

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.