Microphones, Headsets, Footswitches and PTT Accessories for RadioPro Consoles
The desk microphones, headsets, footswitches, speakers and PCs that suit RadioPro Dispatch and Solo, and how USB PTT microphones are configured.
A RadioPro console (Dispatch or Solo) is only as usable as its audio and push-to-talk (PTT) hardware. The installation guides say a "professional quality" desk microphone and speakers, or a professional headset, are needed to transmit and receive between a dispatcher and the radio system, and that one or more footswitches can start PTT for one or more channels. CTI publishes a manufacturer-approved accessory catalog for these.
What the catalog covers
| Category | Notes from the catalog |
|---|---|
| PC workstation and monitors | The catalog describes a mini-tower with an Intel Core i5, 8 GB memory, a first disk for the operating system and a second 1 TB disk for history logging, and video interfaces that support dual monitors. Widescreen 20, 22 and 23 inch monitors are listed (23 inch recommended) and a 23-inch 10-point multi-touch monitor. Current PC requirements are in radiopro-dispatch-layout-gateways-and-licensing. |
| Speakers | A 28-watt RMS desk speaker system (50 Hz to 20 kHz) |
| Foot switch | A dual USB foot switch with 6-foot cable; its buttons can be programmed for specific functions such as all call, call selected or a specific channel |
| Microphone | A USB gooseneck PTT desktop microphone (4.5 inch base, 18 inch gooseneck, dynamic, noise cancelling) whose PTT button can be programmed for all call, call selected or a specific channel |
| Headsets | Wireless Bluetooth and USB headsets (over-the-ear, with 6 to 9 hours of talk time) and wired over-the-head headsets, ordered from the headset supplier. A comparison chart shows for each headset whether it suits Dispatch PCs or Solo and Talk, wired or wireless, mono or stereo, noise cancelling and whether it has a PTT button |
| Headset amplifier and USB adapters | A wireless PTT adapter with a quick-disconnect for "H" series headsets and a robust PTT switch, plus USB adapters that add inline mute and audio controls |
| Rack mounts | A rack shelf for the gateway and control-station radio (radiopro-ip-gateway-overview) |
USB PTT microphones
Several CTI-supplied USB desktop microphones with a PTT button work with RadioPro Dispatch and Solo (Dispatch version 8.3.4 and later). Common to them: powered from USB at 5 VDC, a metal body, a gooseneck with a foam windscreen, and a USB B to USB A cable.
- ECS WordSentry USB gooseneck PTT microphone: about 18 inches long, with an LED on the microphone end as PTT indicator.
- VM-1S USB dispatch microphone: a single-channel PTT microphone with an 18-inch gooseneck, a red PTT button and a green LED showing power and USB connection. It uses the standard Windows USB audio drivers, so no driver disc is needed, and a foot-pedal PTT jack is provided. It can be factory-configured to send a keyboard "hot key" or game-controller button sequence for PTT. In Windows, open the recording devices, select the "USB PnP Audio Device", optionally rename it, and set the level slider between 50% and 75% as a starting point; making it the Default audio device would send all system sounds to it.
- LMC Slim microphone/speaker station: a slim USB 2.0 unit with a noise-canceling microphone, a built-in speaker with volume control, a PTT button compatible with Dispatch and Solo, and a metal base; it uses HID drivers native to Windows.
- Buddy DesktopMic 7G PTT: a USB microphone whose firmware button actions can be reconfigured with the manufacturer's utility, as the technical note describes (delete the events on the main red button, then add the four actions that give the PTT behavior and save them to the microphone).
Configuring microphone audio and PTT in Dispatch
A separate document covers configuring microphones that have PTT buttons in Dispatch versions 8.3.6 and later and 9.3.12 and later, with a cumulative microphone patch for earlier builds. In Edit mode:
- Dispatch Settings: the PTT microphone should be listed under USB Devices, and its PTT action is set by default to "Call the default contact on the selected channel". Custom actions can be created for other behavior (radiopro-dispatch-layout-gateways-and-licensing).
- Audio Presets, Microphone Configuration: verify that the settings match the device (the guide has settings for a WordSentry, the ETC VM-1S, and a Buddy DesktopMic; it notes that newer revisions of the VM-1S do not have the correct defaults).
- Sound Configure / Presets: General tab (mute while transmitting, PC cross-mute, audio quality), Presets tab (mic in, select/unselect/intercom outputs), Levels tab (initial volumes) and Advanced tab (duplicate PTT ID audio and intercom levels). For Solo, the Audio and Speaker/Headphones tabs hold the corresponding choices.
Open Dispatch as an administrator to change these settings. See radiopro-dispatch-voice-dispatching for operating levels and radiopro-dispatch-troubleshooting if the microphone is not recognized.
Source documents
This article summarizes the following published CTI Products manuals. They are the authoritative reference.
This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.
Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.