PL Tones, CTCSS, and DCS

Two-Way Radio Concepts and Electronics Fundamentals · Last updated · About 6 min read

"PL" stands for Private Line, Motorola's trademarked name for the technology more generically known as CTCSS. Along with its digital counterpart, DCS, these systems let multiple independent groups of radio users share the same frequency channel without hearing each other's routine traffic.

CTCSS (Continuous Tone-Coded Squelch System)

CTCSS was invented in 1951 by engineers in Motorola's Research and Development division as an analog in-band signaling method to reduce co-channel interference on shared two-way radio frequencies. Motorola marketed it under the trademark Private Line (PL), a name that became so common in the industry that "PL tone" is often used generically even for non-Motorola equipment.

How CTCSS Works

A CTCSS-equipped radio continuously transmits a low-frequency, sub-audible tone (in the range of roughly 67 Hz to 254.1 Hz) along with the voice signal, for the entire duration of the transmission. A receiving radio's squelch circuit is set to open only when it detects that specific matching tone. Other radios on the same physical frequency, but set to a different tone (or no tone at all), keep their receivers muted and don't hear that traffic. This allows several independent user groups to share one RF channel while each group only hears its own conversations — reducing "channel clutter" without requiring separate frequencies for everyone.

CTCSS tones and which radios they unmute A log frequency scale shows the CTCSS tone range of 67 to 254.1 hertz sitting below the 300 to 3000 hertz voice band. Below it, a radio transmitting with a 67.0 hertz tone unmutes a radio set to 67.0 hertz and a radio using carrier squelch, while a radio set to 100.0 hertz stays muted. Where the tone sits: below everything you hearThe CTCSS tone rides under the voice for the whole transmissionCTCSS tones67.0 – 254.1 HzVoice300 – 3000 Hz50671002543001k3kHzabove ~200 Hz a tone can be faintly audibleThree groups, one frequencyRadio A transmits with a 67.0 Hz tone. Only radios set to 67.0 Hz unmute.Radio A — transmittingvoice + 67.0 HzRFRadio Bset to 67.0 HzSpeaker openshears the callRadio Cset to 100.0 HzStays mutedhears nothingRadio Dno tone (carrier squelch)Speaker openshears the call
A radio set to a different tone still receives the signal — its squelch simply never opens, so the user hears nothing. A radio with no tone set hears every group on the channel.

CTCSS was standardized across manufacturers by the Electronics Industries Alliance (EIA) as EIA/TIA RS-220 in 1959, which defined 37 precise standard tone frequencies for interoperability. The standard tone set was later extended, and the commonly used modern list (documented in later revisions including TIA-603-E and widely implemented by manufacturers) comprises 50 standard tones.

Standard CTCSS Tone Frequencies (Hz)

# Hz # Hz # Hz # Hz # Hz
1 67.0 11 94.8 21 131.8 31 167.9 41 203.5
2 69.3 12 97.4 22 136.5 32 173.8 42 206.5
3 71.9 13 100.0 23 141.3 33 177.3 43 210.7
4 74.4 14 103.5 24 146.2 34 179.9 44 218.1
5 77.0 15 107.2 25 150.0 35 183.5 45 225.7
6 79.7 16 110.9 26 151.4 36 186.2 46 229.1
7 82.5 17 114.8 27 156.7 37 189.9 47 233.6
8 85.4 18 118.8 28 159.8 38 192.8 48 241.8
9 88.5 19 123.0 29 162.2 39 196.6 49 250.3
10 91.5 20 127.3 30 165.5 40 199.5 50 254.1

Frequencies above roughly 200 Hz fall closer to the edge of audibility and may be faintly audible ("tone leak") on some radios, so manufacturers generally recommend testing before deploying tones in that upper range. 150.0 Hz is also notable as the NATO military standard CTCSS tone.

DCS / DPL (Digital-Coded Squelch / Digital Private Line)

DCS (also called CDCSS, Continuous Digital-Coded Squelch System) is the digital evolution of CTCSS. Instead of a continuous analog tone, DCS transmits a continuous sub-audible digital code word — a repeating binary data stream — alongside the voice audio. Motorola's trademarked name for its implementation is Digital Private Line (DPL); General Electric's equivalent implementation is called Digital Channel Guard (DCG); the codes are also sometimes called Digital Quiet Talk (DQT) codes by other manufacturers.

How DCS Code Words Are Structured

Technically, the DCS code word is a 23-bit Golay (23,12) error-correcting code, transmitted repeatedly at 134 bits per second (some sources cite 134.4 bit/s) in the sub-audible range (below roughly 300 Hz, inaudible to human hearing) along with the voice transmission. Its error-detection and correction capability (correcting up to 3 bit errors) allows a receiver to reliably recover the correct code even in noisy RF conditions.

Each DCS code is conventionally written as a 3-digit octal number (9 bits), giving a theoretical code space of 512 possible values (0–511). Not all of these are used in practice: many of the possible codes are functionally equivalent to, or easily confused with, another code (an "alias"), so the industry narrowed the usable set down to 83 standard codes that are free of aliasing problems and considered safe to use across any DCS-capable radio without interoperability issues or false triggering. Examples of standard octal DCS codes include 023, 025, 026, 114, 205, 306, 411, 606, and 731 — the full 83-code list is published by radio manufacturers and repeater reference sites (see References).

Tone Squelch vs Carrier Squelch

Two-way radios generally support at least two different squelch modes, and understanding the difference matters for troubleshooting "why can't I hear anyone":

  • Carrier squelch (sometimes called "monitor" or "open" squelch) opens the receiver's audio for any signal strong enough to be detected on the channel, regardless of whether it carries a CTCSS tone or DCS code. This is the mode used to hear all traffic on a frequency, including users on different tones/codes, and is typically used when scanning a channel or diagnosing interference.
  • Tone squelch (CTCSS or DCS mode) keeps the receiver muted unless the incoming signal also carries the specific matching tone or code the radio is programmed to listen for. This is the normal operating mode for day-to-day fleet use, since it keeps other groups' unrelated chatter from being heard.

Radios are commonly configured with separate encode and decode settings — for example, transmitting with a tone/code but leaving receive on carrier squelch (or vice versa) — so it's worth checking both settings independently when a radio seems to be missing or over-hearing traffic.

At end of transmission, most CTCSS/DCS radios also send a brief end-of-transmission signal (reverse burst/turn-off code) so receivers close squelch instantly instead of waiting out a "squelch tail" — see Reverse Burst and Squelch Tail Elimination for the mechanism and what happens if this signal occurs mid-transmission (e.g. during doubling).

Not Encryption or Security

It's important to understand that neither CTCSS/PL tones nor DCS/DPL codes provide any real privacy or security. They are channel-sharing and interference-reduction tools, not encryption. Anyone with a scanner or a radio set to "no tone"/carrier squelch can still hear all traffic on the frequency regardless of what tone or code is being used — the tone or code only controls whether a given radio's speaker automatically unmutes. Genuine communications security requires actual encryption, which is a separate feature from tone or digital squelch (see the encryption discussion on the P25 (Project 25) page for how that's handled in a digital public-safety standard).

References

This article is part of the CTI Products Knowledge Base. Questions about RadioPro or MCN products? Call +1 (513) 595-5900 or email info@ctiproducts.com.

Informational only. This article is general background and is not engineering, safety, legal or regulatory advice. Verify requirements with the equipment manufacturer and the applicable authority before relying on it. Product names and trademarks belong to their respective owners.